System Operation
Unit Movements
AXIOM Artis AXA4-100.620.08.01.02 49 / 94
Storing system positions with shortcut (direct
positions I, II, III)
You can assign the three most frequently used system positions to the direct po-
sitions I, II, III:
u Move the unit to the required position.
u Press the Store key.
– The LED on the key lights up.
u Press the required position key.
– The current system position is stored under the selected direct position
number. The previously stored position is deleted.
– The LED on the Store key goes out.
– The system returns to its original state.
Cancellation ➩ See above.
Deleting programmed positions
You can also delete the stored system positions.
u Press the Programmed Positions key.
– The LED on the key lights up.
– The Programmed Positions menu appears on the data display.
u Select the memory position (number) you want to delete by tilting the stand/
C-arm joystick (of plane A) backward/forward.
u Press the Store key for longer than 2 seconds.
– The memory position is deleted.
– The LED on the Store key goes out.
Positions marked with a lock symbol can only be deleted by Siemens Service.
Comments to this Manuals