Siemens CU240S DP Operations Instructions download pdf (Page 33)

Commissioning (software)

2.4 Parameterization with Operator Panel

Control Units CU240S

Operating Instructions (Compact), 04/2006, A5E00766042B AA

2-13

2.4.3 Changing parameters via OP

Changing parameter with the OP

The description below serves as an example that shows how to change any parameter using

the OP.

Table 2-13 Changing P0003 - parameter access level

Step Result on display

Press

to access parameters

Press until P0003 is displayed

Press to display the parameter value

Press

or to set the required value (set to 3)

Press

to confirm and store the value

6 All level 1 to level 3 parameters are now visible to the user.

Table 2-14 Changing P0719 an index parameter - setting OP control

Step Result on display

Press

to access parameters

Press until P0719 is displayed

Press

to access the parameter value

Press

or to select index 1

Press

to display actual set value

Press

or to the required value

Press

to confirm and store the value

Press

until r0000 is displayed

Press

to return the display to the standard drive display (as defined by the customer)

Note

The OP sometimes displays "bUSY" when changing parameter values. This means that the

inverter is presently handling another higher-priority task.

1 ... 32 33 34 ... 110

No comments

Siemens CU240S DP Operations Instructions Page 33