Siemens TC63 User Manual download pdf (Page 51)

100

101

TC63 AT Command Set

2.13 AT+CSCS

TC63_ATC_V00.490 Page 51 of 501 5/24/05

Confidential / Draft - Do not copy

2.13 AT+CSCS Select TE character set

The AT+CSCS write command informs the TA which character set <chset> is used by the TE. This enables the

TA to convert character strings correctly between TE and ME character sets. See also Section 1.5, Supported

character sets.

Note that when the TA-TE interface is set to 8-bit operation and the used TE alphabet is 7-bit, the highest bit will

be set to zero.

Syntax

Parameter Description

“GSM“

(&F)

GSM default alphabet (GSM 03.38 subclause 6.2.1);

Note: This setting may cause software flow control problems since the codes

used to stop and resume data flow (XOFF = decimal 19, XON = decimal 17)

are interpreted as normal characters.

“UCS2“ 16-bit universal multiple-octet coded character set (ISO/IEC10646 [32]); UCS2

character strings are converted to hexadecimal numbers from 0000 to FFFF;

e.g. "004100620063" equals three 16-bit characters with decimal values 65, 98

and 99, $(AT R97)$

Test Command

AT+CSCS=?

Response(s)

+CSCS: (list of supported<chset>s)

Read Command

AT+CSCS?

Response(s)

+CSCS: <chset>

Write Command

AT+CSCS=[<chset>]

Response(s)

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

GSM 07.07, GSM 11.11 ! % % % % % % ! % !

<chset>

(str)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 500 501

Comments to this Manuals

No comments

Siemens TC63 User Manual Page 51

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63