Siemens TC63 User Manual download pdf (Page 169)

TC63 AT Command Set

7.22 AT^SLCC

TC63_ATC_V00.490 Page 169 of 501 5/24/05

Confidential / Draft - Do not copy

type of address octect

145 dialing string <number> includes international access code character '+'

129 otherwise

Alphanumeric representation of <number> corresponding to the entry found in phonebook; used character set

should be the one selected with command AT+CSCS (Select TE Character Set).

The maximum displayed length of <alpha> is 16 characters. If <alpha> has more than 16 characters, only the

first 15 characters will be displayed. To indicate an overflow, a special character will be used as the 16th char-

acter. This will be a space if the character set selected with AT+CSCS is 'GSM', or 'E400' if the character set is

'UCS2'.

Due to time constraints on the necessary evaluation of the phonebook, this parameter may show a default value

during early call phases (e.g. for <stat>= ''dialing'', ''incoming'' or ''alerting''), even if a phonebook entry is

present for the number concerned.

Notes

• Teleservices other than voice, data, fax are not fully supported by ME. They are used only in connection with

the handling for AT+CSNS, and may therefore occur in parameter <mode> for mobile terminated calls.

• If a URC "^SLCC" in verbose mode (see AT^SCFG) has been buffered while the interface was in dedicated

mode (depending on the settings of AT+CMER parameter <bfr>), each buffered event indicator will be output

as a separate URC after the interface returns to idle mode.

However, the output will deliver the list of current calls in the "current" state (at the time when the output is

generated), possibly leading to multiple displays of identical list configurations.

• Some parameters of AT command AT+CHLD, as well as some situations where the call status in the network

changes very quickly (e.g. the transition between <stat>= ''unknown'', ''dialing'' and ''alerting'' for a call to a

reachable subscriber within the registered network) may lead to quasi-simultaneous changes to the states of

one or several calls in the list, possibly leading to multiple displays of identical list configurations.

• If multiple displays of identical list configurations occur, this happens because of intermediate states of the

list, that have already been overridden by new transitions and states. Thus, it is guaranteed that the configu-

ration displayed in such cases is the current configuration at the time of the last display.

• It is adviseable to receive URC "^SLCC" on an interface that is not used for call initiation, if verbose output is

configured. If only voice calls are expected, a setting of AT^SM20= 0 may be used alternatively in order to

keep the call from blocking the interface.

Examples

EXAMPLE 1

<type>

(num)

<alpha>

(str)

^SYSSTART

at+cpin=9999

+CREG: 2

+CREG: 1,''0145'',''0016''

We are now registered

at^sm20=0

command ''ATD'' for an outgoing voice call will termi-

nate immediately with response ''OK''

atd''1234567'';

We start a voice call.

''OK'' response is issued immediately because of set-

ting ''^SM20=0''

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 500 501

Siemens TC63 User Manual Page 169

Comments to this Manuals

Siemens TC63 User Manual Page 169

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63