Siemens TC63 User Manual download pdf (Page 147)

TC63 AT Command Set

7.6 ATD><str>

TC63_ATC_V00.490 Page 147 of 501 5/24/05

Confidential / Draft - Do not copy

7.6 ATD><str> Mobile originated call from active memory using cor-

responding field

Syntax

Command Description

This command searches the active phonebook for a given string <str> and dials the assigned phone number.

The termination character ";" is mandatory since dialing from a phonebook is only supported for voice calls and

for sending *# codes of Supplementary Services or other functions.

Parameter Description

String type value ("x"), which should equal an alphanumeric field in at least one phonebook entry in the searched

memories; used character set should be the one selected with AT+CSCS. <str> can contain escape sequences

as described in chapter "Supported character sets".

<str> must be wrapped in quotation marks (""), if escape sequences or parameter <mgsm> are used or if the

alphanumeric strings contains a blank. If not, quotation marks are optional.

If AT+CSCS is set to "UCS2", with respect to the coding of UCS2-characters only phonebook entries that contain

an alphanumeric string with as size less than the half of the parameter <tlength> from AT+CPBW can be

dialed.

String of GSM modifiers:

I Activates CLIR (disables presentation of own phone number to called party)

i Deactivates CLIR (enables presentation of own phone number to called party)

Notes

• This command may be aborted generally by receiving a character during execution. Abortion is not possible

during some states of connection setup such as handshaking.

• The command is not applicable to data calls. Any attempt to dial <str> without semicolon ";" causes the

result code "NO CARRIER" to appear.

• Parameter <mgsm> only if no *# code is within the dialing string.

Exec Command

ATD><str>[<mgsm>];

Response(s)

ERROR

+CME ERROR: <err>

If no dialtone (parameter ATX2 or ATX4):

NO DIALTONE

If busy (parameter setting ATX3 or ATX4):

BUSY

If connection cannot be set up:

NO CARRIER

When TA returns to command mode after call release:

If successfully connected:

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

V.250 % % § % % § § ! ! !

<str>

(str)(+CSCS)

<mgsm>

(str)

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 500 501

Siemens TC63 User Manual Page 147

Comments to this Manuals

Siemens TC63 User Manual Page 147

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63