Siemens TC63 User Manual Page 115
- Page / 501
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
TC63 AT Command Set
5.3 AT^SPIC
s
TC63_ATC_V00.490 Page 115 of 501 5/24/05
Confidential / Draft - Do not copy
Password for which the corresponding PIN counter is to be displayed.
“SC“ SIM PIN or SIM PUK. If the SIM PIN has been deactivated after three failed
attempts, the counter for SIM PUK will be returned instead.
“PS“ "Phone code" or "device code" (cf. AT+CLCK and AT+CPWD). If incorrectly
entered three times, the Master Phone Code is required to lift the lock and the
number of remaining attempts for the master phonecode will be returned.
“P2“ SIM PIN2 or SIM PUK2. If the SIM PIN2 has been deactivated after three failed
attempts, the counter for SIM PUK2 will be returned instead.
“PN“ Network Personalisation
Identification of the currently required password.
SIM PIN ME is waiting for SIM PIN1.
SIM PUK ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to
enter PIN1.
SIM PIN2 ME is waiting for PIN2, when the attempt to access PIN2 requiring features was
acknowledged with +CME ERROR:17 (e.g. if the user attempts to edit the FD
phonebook).
SIM PUK2 ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding
command was acknowledged with +CME ERROR:18.
PH-SIM PIN ME is waiting for phone-to-SIM card password if ''PS'' lock is active and user
inserts other SIM card than the one used for the lock. (''PS'' lock is also referred
to as phone or antitheft lock).
PH-SIM PUK ME is waiting for Master Phone Code, if the above ''PS'' lock password was
incorrectly entered three times.
PH-NET PUK ME is waiting for network personalisation unblocking password
Notes
• Whenever the required password changes, <counter> changes to reflect that change. Please refer to the
examples below.
• For passwords associated to the phone lock (''PS'' lock set by user or factory) or other factory set locks, such
as ''PF'', ''PN'', ''PU'', ''PP'', ''PC'' the number of attempts is subject to a timing algorithm explained in
AT+CPIN. If these passwords are incorrectly entered the counter first returns 3, 2 and 1 remaining attempt(s),
but then gives the total number of attempts which amounts to 63 (see example below).
• See also Chapters AT+CLCK, AT+CPIN, AT+CPIN2, AT+CPWD, AT^SLCK for further information on locks and
passwords.
Examples
EXAMPLE 1
The user fails to provide a correct SIM PIN three times. The counter decreases each time. After the counter
reaches zero, the SIM PUK is required. After each failure to enter a correct SIM PUK, the counter decreases.
<facility>
(str)
<code>
(text)
at+cpin?
+CPIN: SIM PIN
OK
Currently required password is PIN1.
at^spic
^SPIC: 3
OK
3 attempts left.
at+cpin=9999
+CME ERROR: incorrect password
- AT Command Set 1
- Contents 3
- TC63 AT Command Set 10
- List of Tables 12
- List of Figures 13
- 1. Introduction 14
- 1.2 Related documents 15
- 1.3 Document conventions 16
- 1.3.1 Quick reference table 16
- 1.4 AT Command Syntax 18
- 1.4.1 Using Parameters 18
- 1.5 Supported character sets 20
- 1.9 Errors and Messages 29
- 2. Configuration Commands 30
- 2.2.1 AT&V responses 32
- 3. Status Control Commands 66
- 3.2 AT+CIND Indicator control 68
- 4.1 AT\Q Flow control 89
- 4.5 ATE Enable command echo 93
- 4.9.1 Autobauding 101
- 5. Security Commands 108
- 5.4 AT+CLCK Facility lock 118
- 5.5 AT^SLCK Facility lock 123
- 5.6 AT+CPWD Change Password 124
- 5.7 AT^SPWD Change Password 128
- 5.8 AT^SCSL Customer SIM Lock 130
- 6. Identification Commands 134
- 7. Call related Commands 140
- 7.2 ATA Answer a call 141
- 7.10 AT+CHUP Hang up call 151
- 7.29 ATP Select pulse dialing 178
- 7.30 ATT Select tone dialing 178
- 8. Network Service Commands 179
- 8.5 AT+CSQ Signal quality 187
- 8.6 AT^SMONC Cell Monitoring 188
- 8.7 AT^SMOND Cell Monitoring 190
- 8.8.1 AT^MONI responses 194
- 8.8.2 Service states 195
- 8.9.1 AT^MONP responses 197
- 8.10 AT^SMONG GPRS Monitor 198
- 8.12 AT^SHOM Display Homezone 202
- 9.5 AT+CCUG Closed User Group 212
- 9.7 AT+CCWA Call Waiting 218
- 10. Internet Service Commands 235
- Remote Client 257
- 11. GPRS Commands 268
- 12. FAX Commands 311
- 12.4 AT+FRM Receive Data 314
- 12.5 AT+FRS Receive Silence 315
- 12.7 AT+FTM Transmit Data 317
- 13.1 SMS parameters 319
- 13.7 AT+CMGS Send SMS message 331
- 14. SIM related Commands 363
- 15.3 Related AT Commands 384
- 16.2 ^SSTN SAT Notification 388
- 16.4 AT^SSTR SAT Response 390
- 17. Phonebook Commands 391
- 17.2 AT+CNUM Read own numbers 392
- 18. Audio Commands 411
- 18.5 AT+CMUT Mute control 414
- 18.6 AT+VTD Tone duration 415
- 19. Hardware related Commands 436
- 19.2 AT+CALA Set alarm time 437
- 19.7.4 Example: Using I²C Bus 456
- 20. Miscellaneous Commands 457
- 21. Appendix 462
Related products and manuals for Hardware Siemens TC63
Hardware Siemens BC-16 User Manual
(2 pages)
(2 pages)
Hardware Siemens 54 User Manual
(56 pages)
(56 pages)
Hardware Siemens 300 User Manual
(64 pages)
(64 pages)
Hardware Siemens CL-110-I User Manual
(129 pages)
(129 pages)
Hardware Siemens CP 1515 User Manual
(299 pages)
(299 pages)
Hardware Siemens I-SURF User Manual
(70 pages)
(70 pages)
Hardware Siemens C2-010 User Manual
(51 pages)
(51 pages)
Hardware Siemens TC35 User Manual
(39 pages)
(39 pages)
Hardware Siemens S5-135U/155U User Manual
(54 pages)
(54 pages)
Hardware Siemens TC35i User Manual
(37 pages)
(37 pages)
© 2020, manymanuals.com. All rights reserved. | 0.191 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals