Siemens TC63 User Manual Page 96

  • Download
  • Add to my manuals
  • Print
  • Page
    / 501
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 95
TC63 AT Command Set
4.7 AT+IFC
s
TC63_ATC_V00.490 Page 96 of 501 5/24/05
Confidential / Draft - Do not copy
4.7 AT+IFC Set Flow Control separately for data directions
The command AT+IFC can be used to set or query the data flow control separately for each data direction. In
contrast to this, flow control settings made with AT\Q are valid in both data directions.
Syntax
Parameter Description
Specifies the method used by the TE when receiving data from the TA.
[0] none
1 XON/XOFF, terminate flow control in the Cellular Engine
2 RTS line
3 XON/XOFF, evaluate flow control in the Cellular Engine and pass it through
(over the air) to the opposite TE
Specifies the method used by the TA when receiving data from the TE.
[0] none
1 XON/XOFF
2 CTS line
Test Command
AT+IFC=?
Response(s)
+IFC: (list of supported <TEflowcontrol>s), (list of supported <TAflowcontrol>s)
OK
Read Command
AT+IFC?
Response(s)
+IFC: <TEflowcontrol>, <TAflowcontrol>
OK
Write Command
AT+IFC=<TEflowcontrol>, <TAflowcontrol>
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
V.250 ! % % ! § § § ! % !
<TEflowcontrol>
(num)(&W)
<TAflowcontrol>
(num)(&W)
Page view 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 500 501

Comments to this Manuals

No comments