Siemens TC63 User Manual download pdf (Page 156)

100

101

TC63 AT Command Set

7.14 ATS7

TC63_ATC_V00.490 Page 156 of 501 5/24/05

Confidential / Draft - Do not copy

7.14 ATS7 Set number of seconds to wait for connection completion

ATS7 specifies the number of seconds the TA will wait for the completion of the call setup when answering or

originating a data call. Also referred to as "no answer timeout". To put it plainly, this is the time to wait for the

carrier signal. If no carrier signal is received within the specified time, the TA hangs up.

Syntax

Parameter Description

Number of seconds to wait for connection completion

000...060

(&F)

Notes

•Command ATS7 is only applicable to data calls.

• Values greater than 60 (maximum 255) cause no error, but <n> will be restored to the maximum value of 60.

• The correlation between ATS7 and ATS0 is important. If the called party has specified a high value for

ATS0=<n> call setup may fail.

Example: Call setup may fail if ATS7=30 and ATS0=20.

Read Command

ATS7?

Response(s)

<n>

Write Command

ATS7=<n>

Response(s)

ERROR

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

V.250 ! % ! % % ! ! ! % !

<n>

(num)(&W)(&V)

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 500 501

Comments to this Manuals

No comments

Siemens TC63 User Manual Page 156

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63