Siemens TC63 User Manual download pdf (Page 306)

100

101

TC63 AT Command Set

11.20 ATH

TC63_ATC_V00.490 Page 306 of 501 5/24/05

Confidential / Draft - Do not copy

11.20 ATH Manual rejection of a network request for PDP context acti-

vation

The V.250 ATH command may be used to deactivate all PDP contexts which are active or online on the same

interface. This command should not be used to deactivate PDP contexts during the implicit PDP context deacti-

vation procedure which is started automatically after LCP termination or by dropping the DTR line (if AT&D2 is

configured). For details refer to Section 11.5.1, Automatic deactivation of PDP context during dial-up PPP.

The ATH command may also be used to reject a network request for PDP context activation announced by the

unsolicited result codes "RING: GPRS" or "+CRING: GPRS".

Syntax

Notes

• In contrast to GSM 07.07 it is possible to cancel a connection with ATH after a break. This is done for com-

patibility reasons due to the "dial-up network" drivers of Microsoft Windows.

• ATH is used as a standard V.250 AT command, too.

• If ATH is used to reject a network request for PDP context activation, then other PDP contexts on the same

interface which are active or online will not be deactivated.

Exec Command

ATH

Response(s)

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

GSM 07.07 % % § % % § § ! ! !

1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 500 501

Comments to this Manuals

No comments

Siemens TC63 User Manual Page 306

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63