Siemens TC63 User Manual Page 190

  • Download
  • Add to my manuals
  • Print
  • Page
    / 501
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 189
TC63 AT Command Set
8.7 AT^SMOND
s
TC63_ATC_V00.490 Page 190 of 501 5/24/05
Confidential / Draft - Do not copy
8.7 AT^SMOND Cell Monitoring
The AT^SMOND execute command can be used to obtain status information of the service cell and up to six neigh-
bour cells. The advantage over other cell monitoring commands is that AT^SMOND delivers more detailed infor-
mation about the received signal strength.
Syntax
Parameter Description
Serving cell information (comma-separated, no cr/lf included)
<MCC>,<MNC>,<LAC>,<cell>,<BSIC>,<chann>,<RxLev>,<RxLev>Full,<RxLev>Sub,<RxQual>,<RxQual
>Full,<RxQual>Sub,<Timeslot>
If no serving cell is found, unavailable values are omitted:" ,,,,,,<RxLev>,,,0,,,0"
Neighbour cell information for neighbour cell 1 through 6 (comma-separated, no cr/lf included)
<MCC>
1
,<MNC>
1
,<LAC>
1
,<cell>
1
,<BSIC>
1
,<chann>
1
,<RxLev>
1
, (these parameters repeated for neighbour
cells 2 through 6 with no CR/LF): ... <MCC>
6
,<MNC>
6
,<LAC>
6
,<cell>
6
,<BSIC>
6
,<chann>
6
,<RxLev>
6
An unavailable cell appears as follows: " ,,,,,,0"
Values for RSSI and BER (comma-separated, no cr/lf included)
<RSSI>,<BER>
Mobile country code
3 digits, e.g. 232
000 Not decoded
Test Command
AT^SMOND=?
Response(s)
OK
ERROR
+CME ERROR
Exec Command
AT^SMOND
Response(s)
^SMOND: [<sci>][, <nci>][, <TA>][, <rssiber>]
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
SIEMENS, 3GPP TS 05.08 % % % % % % % ! ! !
<sci>
(str)
<nci>
(str)
<rssiber>
(str)
<MCC>
(num)
Page view 189
1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 500 501

Comments to this Manuals

No comments