Siemens TC63 User Manual download pdf (Page 312)

100

101

TC63 AT Command Set

12.2 AT+FCLASS

TC63_ATC_V00.490 Page 312 of 501 5/24/05

Confidential / Draft - Do not copy

12.2 AT+FCLASS Fax: Select, read or test service class

AT+FCLASS sets the ME to a particular mode of operation (data, fax). This allows the ME to process information

in a manner suitable for that type of information.

Syntax

Parameter Description

[0]

(&F)

Data (e.g. EIA/TIA-602 or ITU V.250)

1 Fax class 1 (EIA/TIA-578-A, Service Class 1)

Notes

• Using Error Correcting Mode (ECM) when sending FAXes over GSM should be avoided.

• If <n> is set to 1, all incoming calls will be answered as fax calls when ATA is issued on multiplexer channel

1 resp. ASC0. For calls explicitly signaled as voice or data calls, this procedure will fail with result code "NO

CARRIER", but the incoming call will continue to ring.

It is possible to change the setting of <n> to 0 while the call is ringing, and accept the call afterwards with ATA.

Test Command

AT+FCLASS=?

Response(s)

(list of supported <n>s)

Read Command

AT+FCLASS?

Response(s)

<n>

Write Command

AT+FCLASS=<n>

Response(s)

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

EIA/TIA-592-A ! % ! % % ! ! ! % !

<n>

(num)(&W)(&V)

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 500 501

Comments to this Manuals

No comments

Siemens TC63 User Manual Page 312

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63