Siemens TC63 User Manual Page 363
- Page / 501
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
TC63 AT Command Set
14. SIM related Commands
s
TC63_ATC_V00.490 Page 363 of 501 5/24/05
Confidential / Draft - Do not copy
14. SIM related Commands
The AT commands described in this chapter are related to the Subscriber Identity Module (SIM) connected to
TC63.
Note:
If using data from the SIM please bear in mind that the content of all Elementary Files is subject to change at any
moment!
This is true because the network can change the SIM's data in the background via the SIM Application Toolkit
(SAT) procedure "Data download to SIM". For a detailed description please refer to GSM 11.14, [24].
To get informed that changing Elementary Files has taken place the TA needs to hook to the SAT Proactive Com-
mand "REFRESH". To achieve this, the AT command interface of SAT, i.e. Remote-SAT, needs to be activated.
An overview is given at Chapter 16., SIM Application Toolkit (SAT) Commands, additional information is available
with the document "Remote-SAT User Guide" [4].
14.1 AT+CRSM Restricted SIM Access
AT+CRSM offers easy access of the Elementary Files on the SIM. Access to the SIM database is restricted to the
commands which are listed at <command>. However, additional SIM commands are available via AT^SXSM.
All parameters of AT+CRSM are used as specified by GSM 11.11 [23]. TC63 handles internally all required SIM
interface locking and file selection routines.
As response to the command, the TC63 sends the actual SIM information parameters and response data. Error
result code "+CME ERROR" may be returned if the command cannot be passed to the SIM, e.g. if the SIM is not
inserted. However, failure in the execution of the command in the SIM is reported in <sw1> and <sw2> param-
eters.
AT+CRSM requires PIN authentication. However, using <command> "READ BINARY" and <command> "READ
RECORD" is possible before PIN authentication and if the SIM is blocked (state after three failed PIN authenti-
cation attempts) to access the contents of the following Elementary Files:
Please beware of possible changes to Elementary Files by the network at any time, refer Chapter 14., SIM
related Commands.
Syntax
EF Symbol EF Name EF ID (hex.) EF ID (dec.)
EF
ICCID
ICC identification 2FE2 12258
EF
ELP
Extended language pref-
erence
2F05 12037
EF
LP
Language preference 6F05 28421
EF
SPN
Service provider name 6F46 28486
EF
AD
Administrative data 6FAD 28589
EF
Phase
Phase identification 6FAE 28590
EF
ECC
Emergency call codes 6FB7 28599
Test Command
AT+CRSM=?
Response(s)
OK
- AT Command Set 1
- Contents 3
- TC63 AT Command Set 10
- List of Tables 12
- List of Figures 13
- 1. Introduction 14
- 1.2 Related documents 15
- 1.3 Document conventions 16
- 1.3.1 Quick reference table 16
- 1.4 AT Command Syntax 18
- 1.4.1 Using Parameters 18
- 1.5 Supported character sets 20
- 1.9 Errors and Messages 29
- 2. Configuration Commands 30
- 2.2.1 AT&V responses 32
- 3. Status Control Commands 66
- 3.2 AT+CIND Indicator control 68
- 4.1 AT\Q Flow control 89
- 4.5 ATE Enable command echo 93
- 4.9.1 Autobauding 101
- 5. Security Commands 108
- 5.4 AT+CLCK Facility lock 118
- 5.5 AT^SLCK Facility lock 123
- 5.6 AT+CPWD Change Password 124
- 5.7 AT^SPWD Change Password 128
- 5.8 AT^SCSL Customer SIM Lock 130
- 6. Identification Commands 134
- 7. Call related Commands 140
- 7.2 ATA Answer a call 141
- 7.10 AT+CHUP Hang up call 151
- 7.29 ATP Select pulse dialing 178
- 7.30 ATT Select tone dialing 178
- 8. Network Service Commands 179
- 8.5 AT+CSQ Signal quality 187
- 8.6 AT^SMONC Cell Monitoring 188
- 8.7 AT^SMOND Cell Monitoring 190
- 8.8.1 AT^MONI responses 194
- 8.8.2 Service states 195
- 8.9.1 AT^MONP responses 197
- 8.10 AT^SMONG GPRS Monitor 198
- 8.12 AT^SHOM Display Homezone 202
- 9.5 AT+CCUG Closed User Group 212
- 9.7 AT+CCWA Call Waiting 218
- 10. Internet Service Commands 235
- Remote Client 257
- 11. GPRS Commands 268
- 12. FAX Commands 311
- 12.4 AT+FRM Receive Data 314
- 12.5 AT+FRS Receive Silence 315
- 12.7 AT+FTM Transmit Data 317
- 13.1 SMS parameters 319
- 13.7 AT+CMGS Send SMS message 331
- 14. SIM related Commands 363
- 15.3 Related AT Commands 384
- 16.2 ^SSTN SAT Notification 388
- 16.4 AT^SSTR SAT Response 390
- 17. Phonebook Commands 391
- 17.2 AT+CNUM Read own numbers 392
- 18. Audio Commands 411
- 18.5 AT+CMUT Mute control 414
- 18.6 AT+VTD Tone duration 415
- 19. Hardware related Commands 436
- 19.2 AT+CALA Set alarm time 437
- 19.7.4 Example: Using I²C Bus 456
- 20. Miscellaneous Commands 457
- 21. Appendix 462
Related products and manuals for Hardware Siemens TC63
Hardware Siemens BC-16 User Manual
(2 pages)
(2 pages)
Hardware Siemens 54 User Manual
(56 pages)
(56 pages)
Hardware Siemens 300 User Manual
(64 pages)
(64 pages)
Hardware Siemens CL-110-I User Manual
(129 pages)
(129 pages)
Hardware Siemens CP 1515 User Manual
(299 pages)
(299 pages)
Hardware Siemens I-SURF User Manual
(70 pages)
(70 pages)
Hardware Siemens C2-010 User Manual
(51 pages)
(51 pages)
Hardware Siemens TC35 User Manual
(39 pages)
(39 pages)
Hardware Siemens S5-135U/155U User Manual
(54 pages)
(54 pages)
Hardware Siemens TC35i User Manual
(37 pages)
(37 pages)
© 2020, manymanuals.com. All rights reserved. | 0.985 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals