Siemens TC63 User Manual Page 79
- Page / 501
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
TC63 AT Command Set
3.4 AT+CEER
s
TC63_ATC_V00.490 Page 79 of 501 5/24/05
Confidential / Draft - Do not copy
Examples
EXAMPLE 1
EXAMPLE 2
The user attempts to set up a multiparty call, though there are only two parties involved in the present con-
versation:
EXAMPLE 3
The user attempts to activate call barring. Activation is denied by the network since the password is blocked
after previous failures to enter the password.
3.4.1 Cause Location ID for the extended error report
ATD"01751223344";
A mobile originated call is rejected by the remote party.
NO CARRIER
Call setup is terminated with NO CARRIER.
AT+CEER
To check the cause, the caller enters AT+CEER.
+CEER: 8,21,0
The Location ID 8 in Section 3.4.1 points to Section 3.4.4, where 21 =
"Call rejected". 0 = "No error" refers to parameter <ssRelease> that is
not applicable.
OK
ATD"01751223344";
OK
AT+CHLD=2
OK
AT+CHLD=3
+CME ERROR: operation temporary not allowed
AT+CEER
+CEER: 22,0,2
The Location ID 22 in Section 3.4.1 points to Section SIEMENS release
cause for Call-related Supplementary Services (CRSS), where 2 = "Ini-
tial conditions not fulfilled (one active, one held call)". 0 = "No error"
refers to parameter <reason> that is not applicable.
OK
AT+clck=oi,1,"0000",3;
+CME ERROR: incorrect password
AT+CEER
+CEER: 35,0,43
The Location ID 35 in Section 3.4.1 points to Section 3.4.5, where 43 =
"NumberOfPWAttemptsViolation" may mean that a wrong password
has been entered for more than 3 times. 0 = "No error" refers to param-
eter <reason> that is not applicable.
OK
ID Description
0 No error (default)
2 GSM cause for L3 Radio Resource Sublayer (GSM 04.08 annex F)
4 GSM cause for L3 Mobility Management (GSM 04.08 annex G)
6 GSM cause for L3 Mobility Management via MMR-SAP (GSM 04.08 annex G)
8 GSM cause for L3 Call Control (GSM 04.08 10.5.4.11 and annex H)
12 GSM cause for L3 SMS CP Entity
14 GSM cause for L3 SMS RL Entity
16 GSM cause for L3 SMS TL Entity
21 GSM cause for L3 Call-related Supplementary Services
34 Network cause for Supplementary Services (GSM 04.08 10.5.4.11 and annex H)
35 Supplementary Services network error (GSM 04.80 3.6.6)
48 GSM cause for GPRS Mobility Management (GSM 04.08 annex G.6)
- AT Command Set 1
- Contents 3
- TC63 AT Command Set 10
- List of Tables 12
- List of Figures 13
- 1. Introduction 14
- 1.2 Related documents 15
- 1.3 Document conventions 16
- 1.3.1 Quick reference table 16
- 1.4 AT Command Syntax 18
- 1.4.1 Using Parameters 18
- 1.5 Supported character sets 20
- 1.9 Errors and Messages 29
- 2. Configuration Commands 30
- 2.2.1 AT&V responses 32
- 3. Status Control Commands 66
- 3.2 AT+CIND Indicator control 68
- 4.1 AT\Q Flow control 89
- 4.5 ATE Enable command echo 93
- 4.9.1 Autobauding 101
- 5. Security Commands 108
- 5.4 AT+CLCK Facility lock 118
- 5.5 AT^SLCK Facility lock 123
- 5.6 AT+CPWD Change Password 124
- 5.7 AT^SPWD Change Password 128
- 5.8 AT^SCSL Customer SIM Lock 130
- 6. Identification Commands 134
- 7. Call related Commands 140
- 7.2 ATA Answer a call 141
- 7.10 AT+CHUP Hang up call 151
- 7.29 ATP Select pulse dialing 178
- 7.30 ATT Select tone dialing 178
- 8. Network Service Commands 179
- 8.5 AT+CSQ Signal quality 187
- 8.6 AT^SMONC Cell Monitoring 188
- 8.7 AT^SMOND Cell Monitoring 190
- 8.8.1 AT^MONI responses 194
- 8.8.2 Service states 195
- 8.9.1 AT^MONP responses 197
- 8.10 AT^SMONG GPRS Monitor 198
- 8.12 AT^SHOM Display Homezone 202
- 9.5 AT+CCUG Closed User Group 212
- 9.7 AT+CCWA Call Waiting 218
- 10. Internet Service Commands 235
- Remote Client 257
- 11. GPRS Commands 268
- 12. FAX Commands 311
- 12.4 AT+FRM Receive Data 314
- 12.5 AT+FRS Receive Silence 315
- 12.7 AT+FTM Transmit Data 317
- 13.1 SMS parameters 319
- 13.7 AT+CMGS Send SMS message 331
- 14. SIM related Commands 363
- 15.3 Related AT Commands 384
- 16.2 ^SSTN SAT Notification 388
- 16.4 AT^SSTR SAT Response 390
- 17. Phonebook Commands 391
- 17.2 AT+CNUM Read own numbers 392
- 18. Audio Commands 411
- 18.5 AT+CMUT Mute control 414
- 18.6 AT+VTD Tone duration 415
- 19. Hardware related Commands 436
- 19.2 AT+CALA Set alarm time 437
- 19.7.4 Example: Using I²C Bus 456
- 20. Miscellaneous Commands 457
- 21. Appendix 462
Related products and manuals for Hardware Siemens TC63
Hardware Siemens BC-16 User Manual
(2 pages)
(2 pages)
Hardware Siemens 54 User Manual
(56 pages)
(56 pages)
Hardware Siemens 300 User Manual
(64 pages)
(64 pages)
Hardware Siemens CL-110-I User Manual
(129 pages)
(129 pages)
Hardware Siemens CP 1515 User Manual
(299 pages)
(299 pages)
Hardware Siemens I-SURF User Manual
(70 pages)
(70 pages)
Hardware Siemens C2-010 User Manual
(51 pages)
(51 pages)
Hardware Siemens TC35 User Manual
(39 pages)
(39 pages)
Hardware Siemens S5-135U/155U User Manual
(54 pages)
(54 pages)
Hardware Siemens TC35i User Manual
(37 pages)
(37 pages)
© 2020, manymanuals.com. All rights reserved. | 0.664 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals