Siemens TC63 User Manual download pdf (Page 285)

100

101

TC63 AT Command Set

11.8 AT+CGEQREQ

TC63_ATC_V00.490 Page 285 of 501 5/24/05

Confidential / Draft - Do not copy

This parameter indicates the maximum allowed SDU size in octets.

[0] subscribed value

10...1520 (value needs to be divisible by 10 without remainder)

1502

This parameter indicates the target value for the fraction of SDUs lost or detected as erroneous. SDU error ratio

is defined only for conforming traffic. The value is specified as "mEe". As an example a target SDU error ratio

of 5*10

-3

would be specified as "5E3" (e.g. AT+CGEQREQ=...,"5E3",...).

[“0E0“] subscribed value

“1E2“

“7E3“

“1E3“

“1E4“

“1E5“

“1E6“

“1E1“

This parameter indicates the target value for the undetected bit error ratio in the delivered SDUs. If no error

detection is requested, Residual bit error ratio indicates the bit error ratio in the delivered SDUs. The value is

specified as "mEe". As an example a target residual bit error ratio of 5*10

-3

would be specified as "5E3" (e.g.

AT+CGEQREQ=...,"5E3",...).

[“0E0“] subscribed value

“5E2“

“1E2“

“5E3“

“4E3“

“1E3“

“1E4“

“1E5“

“1E6“

“6E8“

This parameter indicates whether SDUs detected as erroneous shall be delivered or not.

0no

1yes

2 no detect

[3] subscribed value

(num)

(str)

(str)

(num)

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 500 501

Comments to this Manuals

No comments

Siemens TC63 User Manual Page 285

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63

Relacionado con productos y manuales para Lavadoras Electrolux EWG14750W