Siemens TC63 User Manual download pdf (Page 148)

100

101

TC63 AT Command Set

7.7 ATDI

TC63_ATC_V00.490 Page 148 of 501 5/24/05

Confidential / Draft - Do not copy

7.7 ATDI Mobile originated call to ISDN number

Syntax

Command Description

TA attempts to set up an outgoing call to ISDN number. The termination character ";" is mandatory to set up voice

calls or to send *# codes for Supplementary Services. It must not be used for data and fax calls.

Parameter Description

ISDN number

String with maximum length of 20 characters. Allowed characters: +, 0-9, A, B, C.

Note

• This command may be aborted generally by receiving a character during execution. Abortion is not possible

during some states of connection setup such as handshaking.

Exec Command

ATDI<n>[;]

Response(s)

If no dialtone (parameter ATX2 or ATX4):

NO DIALTONE

If busy (parameter setting ATX3 or ATX4):

BUSY

If connection cannot be set up:

NO CARRIER

All other error reasons:

+CME ERROR

If successfully connected and non-voice call (TA switches to data state):

CONNECT <text>

When TA returns to command mode after call release:

If successfully connected and voice call:

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

V.250 % % ! % % ! ! ! ! !

<n>

(str)

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 500 501

Comments to this Manuals

No comments

Siemens TC63 User Manual Page 148

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63