Siemens TC63 User Manual download pdf (Page 146)

100

101

TC63 AT Command Set

7.5 ATD><n>

TC63_ATC_V00.490 Page 146 of 501 5/24/05

Confidential / Draft - Do not copy

7.5 ATD><n> Mobile originated call from active memory using index

number

Syntax

Command Description

TA attempts to set up an outgoing call to the stored number. The termination character ";" is mandatory since

dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services

or other functions.

Parameter Description

Integer type memory location in the range of locations available in the selected memory, i.e. the index number

returned by AT+CPBR.

String of GSM modifiers:

I Activates CLIR (disables presentation of own phone number to called party)

i Deactivates CLIR (enables presentation of own phone number to called party)

Notes

• This command may be aborted generally by receiving a character during execution. Abortion is not possible

during some states of connection setup such as handshaking.

• The command is not applicable to data calls. Any attempt to dial a data call number from <n> causes the

result code "NO CARRIER" to appear.

• Parameter <mgsm> only if no *# code is within the dialing string.

Exec Command

ATD><n>[<mgsm>];

Response(s)

ERROR

+CME ERROR: <err>

If no dialtone (parameter ATX2 or ATX4):

NO DIALTONE

If busy (parameter setting ATX3 or ATX4):

BUSY

If connection cannot be set up:

NO CARRIER

When TA returns to command mode after call release:

If successfully connected:

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

V.250 % % § % % § § ! ! !

<n>

(num)

<mgsm>

(str)

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 500 501

Comments to this Manuals

No comments

Siemens TC63 User Manual Page 146

Comments to this Manuals

Related products and manuals for Hardware Siemens TC63