Siemens TC63 User Manual Page 117
- Page / 501
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
TC63 AT Command Set
5.3 AT^SPIC
s
TC63_ATC_V00.490 Page 117 of 501 5/24/05
Confidential / Draft - Do not copy
EXAMPLE 3
This example shows that after successful SIM PIN1 authentication the counter of the AT^SPIC execute and
read command refers to SIM PIN2, i.e. it does not reflect the status of SIM PIN1. This may be a problem if
the user enters a wrong PIN1 and is not aware that the number of attempts left to enter SIM PIN1 is counted
down.
To avoid conflicts we recommend to use the AT^SPIC read and write commands rather than the execute com-
mand only. The read command clearly states the currently required password, and the write command may
be used to get the counter for a specific <facility>, in this case for example "P2".
at+cpin=4714
+CME ERROR: incorrect password
at^spic
^SPIC: 63
OK
+CREG: 0
at+cpin=1234
OK
+CREG: 2
+CREG: 1
The mobile ist properly registered to the network.
at+cpin?
+CPIN: READY
The AT+CPIN? read command confirms that SIM
PIN1 authentication was successful.
at^spic
^SPIC: 3
As SIM PIN1 authentication was successful, the
counter relates to SIM PIN2 and correctly indicates
that the user has 3 attempts to enter SIM PIN2.
OK
AT^SPIC?
Likewise, the read command notifies that the ME is
waiting for SIM PIN2.
^SPIC: SIM PIN2
OK
at+clck="SC",0,456789
First attempt to enter a wrong SIM PIN1.
CME ERROR: incorrect password
at^spic
^SPIC: 3
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
at+clck="SC",0,456789
Second attempt to enter a wrong SIM PIN1.
CME ERROR: incorrect password
at^spic
^SPIC: 3
SIM PIN1 authentication is still valid, and the counter
relates to SIM PIN2.
at+clck="SC",0,456789
Third attempt to enter a wrong SIM PIN1.
CME ERROR: incorrect password
+CREG: 0
SIM PIN1 authentication is no longer valid.
at^spic
^SPIC: 10
This time, after the SIM PIN1 code has been dis-
abled, the counter indicates the status of SIM PIN1
and notifies that 10 attempts are left to enter the SIM
PUK.
- AT Command Set 1
- Contents 3
- TC63 AT Command Set 10
- List of Tables 12
- List of Figures 13
- 1. Introduction 14
- 1.2 Related documents 15
- 1.3 Document conventions 16
- 1.3.1 Quick reference table 16
- 1.4 AT Command Syntax 18
- 1.4.1 Using Parameters 18
- 1.5 Supported character sets 20
- 1.9 Errors and Messages 29
- 2. Configuration Commands 30
- 2.2.1 AT&V responses 32
- 3. Status Control Commands 66
- 3.2 AT+CIND Indicator control 68
- 4.1 AT\Q Flow control 89
- 4.5 ATE Enable command echo 93
- 4.9.1 Autobauding 101
- 5. Security Commands 108
- 5.4 AT+CLCK Facility lock 118
- 5.5 AT^SLCK Facility lock 123
- 5.6 AT+CPWD Change Password 124
- 5.7 AT^SPWD Change Password 128
- 5.8 AT^SCSL Customer SIM Lock 130
- 6. Identification Commands 134
- 7. Call related Commands 140
- 7.2 ATA Answer a call 141
- 7.10 AT+CHUP Hang up call 151
- 7.29 ATP Select pulse dialing 178
- 7.30 ATT Select tone dialing 178
- 8. Network Service Commands 179
- 8.5 AT+CSQ Signal quality 187
- 8.6 AT^SMONC Cell Monitoring 188
- 8.7 AT^SMOND Cell Monitoring 190
- 8.8.1 AT^MONI responses 194
- 8.8.2 Service states 195
- 8.9.1 AT^MONP responses 197
- 8.10 AT^SMONG GPRS Monitor 198
- 8.12 AT^SHOM Display Homezone 202
- 9.5 AT+CCUG Closed User Group 212
- 9.7 AT+CCWA Call Waiting 218
- 10. Internet Service Commands 235
- Remote Client 257
- 11. GPRS Commands 268
- 12. FAX Commands 311
- 12.4 AT+FRM Receive Data 314
- 12.5 AT+FRS Receive Silence 315
- 12.7 AT+FTM Transmit Data 317
- 13.1 SMS parameters 319
- 13.7 AT+CMGS Send SMS message 331
- 14. SIM related Commands 363
- 15.3 Related AT Commands 384
- 16.2 ^SSTN SAT Notification 388
- 16.4 AT^SSTR SAT Response 390
- 17. Phonebook Commands 391
- 17.2 AT+CNUM Read own numbers 392
- 18. Audio Commands 411
- 18.5 AT+CMUT Mute control 414
- 18.6 AT+VTD Tone duration 415
- 19. Hardware related Commands 436
- 19.2 AT+CALA Set alarm time 437
- 19.7.4 Example: Using I²C Bus 456
- 20. Miscellaneous Commands 457
- 21. Appendix 462
Related products and manuals for Hardware Siemens TC63
Hardware Siemens BC-16 User Manual
(2 pages)
(2 pages)
Hardware Siemens 54 User Manual
(56 pages)
(56 pages)
Hardware Siemens 300 User Manual
(64 pages)
(64 pages)
Hardware Siemens CL-110-I User Manual
(129 pages)
(129 pages)
Hardware Siemens CP 1515 User Manual
(299 pages)
(299 pages)
Hardware Siemens I-SURF User Manual
(70 pages)
(70 pages)
Hardware Siemens C2-010 User Manual
(51 pages)
(51 pages)
Hardware Siemens TC35 User Manual
(39 pages)
(39 pages)
Hardware Siemens S5-135U/155U User Manual
(54 pages)
(54 pages)
Hardware Siemens TC35i User Manual
(37 pages)
(37 pages)
© 2020, manymanuals.com. All rights reserved. | 0.407 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals