Siemens IC60 User Manual Page 130
- Page / 172
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Telephone numbers
130
Building Technologies
Fire Safety & Security Products
Option Display text Description
4
Speech Dialer
Voice Dialer: if the optional voice board is fitted to the panel then selecting this option
for the telephone number will allow preset voice messages to be sent via the
telephone following an alarm. The kiss off method to acknowledge the alarm
message is the same as the Domestic Format. If Option 1 at P46E is turned on (use
near and confirmed alarm reporting) the panel will not send an alarm in this format.
5
4+2 10p 14/19
4 + 2 (10 pps): this option transmits a 4 digit account code followed by a 2 digit event
code to a central monitoring station. The handshake tone from the monitoring station
must be 1400Hz and the transmit tone from the panel will be at 1900Hz at 10 pulses
per second.
6
4+2 10p 23/18
4 + 2 (10 pps): this option transmits a 4 digit account code followed by a 2 digit event
code to a central monitoring station. The handshake tone from the monitoring station
must be 2300Hz and the transmit tone from the panel will be at 1800Hz at 10 pulses
per second.
7
4+2 20p 14/19
4 + 2 (20 pps): this option transmits a 4 digit account code followed by a 2 digit event
code to a central monitoring station. The handshake tone from the monitoring station
must be 1400Hz and the transmit tone from the panel will be at 1900Hz at 20 pulses
per second.
8
4+2 20p 23/18
4 + 2 (20 pps): this option transmits a 4 digit account code followed by a 2 digit event
code to a central monitoring station. The handshake tone from the monitoring station
must be 2300Hz and the transmit tone from the panel will be at 1800Hz at 20 pulses
per second
9
4+2 DTMF CSum
4 + 2 (DTMF): this option transmits a 4 digit account code followed by a 2 digit event
code plus a checksum using DTMF signals to a central monitoring station. The
handshake tone from the monitoring station must be 1400Hz/2300 Hz.
10
SIA
SIA Format III: this option transmit a 2 digit account code followed by handshake
signals from the monitoring stations. The detailed description can be found in the
enclosed transmission table in chapter
25: SIA Codes reporting format SIA III (SIA
code is a Digital communication Standard for Alarm System communications defined
by ANSI.).
11
SIA slow
SIA Format III-Slow: if a receiver station does not notify the SIA protocol as in option
10, it could be helpful to overcome communication problem by using this option. The
transmitting format is identical but will be sent slower.
- Wireless and hardwired 1
- IC60 - Sintony 60 1
- Installer Manual 1
- Building Technologies 10
- 1 Terminology 12
- 2.1 New features 13
- 2.2 Changes 13
- 3 Programming to EN 50131 15
- 4 System overview 18
- 4.2 Sintony 60 compact 20
- Z1Z10V 0V12V 12VCCC 21
- CCZ5Z2 Z6Z3 Z7Z4 Z8 TAMP 21
- 4.3 Zone connections 25
- 4.3.2 Zone wiring examples 26
- PIR Internal Connections 27
- 4.4 Inputs hardwired 28
- 4.5 Outputs hardwired 28
- 4.7 Programming port 29
- 5.2 Panic functions 30
- 6 Voice board IAV6-90 33
- 6.2.1 Pre-configuration 34
- 6.2.2 Recording messages 36
- 6.2.3 Playing messages 36
- 6.2.4 Re-recording messages 36
- 6.3 Operating instructions 37
- 6.3.1.2 Auto answering 38
- 6.3.3.1 Output DTMF 39
- 6.3.2.2 Call-back 39
- 6.4 Mute siren 41
- 7.3 Radio receiver IRFW6 42
- 8 LCD keypad 43
- Sequence Action 47
- Language 48
- Keypad Number 1 49
- 8.6 Operating a LCD keypad 53
- 8.6.4 LCD quick view mode 54
- 8.6.7 Send manual test call 55
- Program ( 61
- ) Button 61
- 10 Default access codes 62
- 11 Programming users 63
- 11.2 User code type 64
- 11.3 User access options 65
- 11.4 User code privileges 66
- 11.5 Radio user type 67
- 11.6 Radio user privileges 67
- 11.10 User to output mask 70
- 13.1 Installer code 75
- 13.2 Duress digit 75
- 13.3 Dial report delay 75
- 13.5 Two trigger timer 76
- Miscellaneous Options 78
- P25E 10E1-8E 78
- Installer Options 79
- P25E 11E 1-8E 79
- Miscellaneous User Options 80
- P25E 13E 1-8E 80
- 15 Time and date setting 82
- 16 Outputs 84
- Outputs 85
- Output B Options 85
- P35E 1-8E 1-8E 85
- Output C Options 85
- P36E 1-8E 1-5E 85
- 16.4 Un-map an output 87
- 17 Areas 89
- Area B Options 90
- P46E 1-2E 1-8E 90
- (1 = Area A, 2 = Area B) 90
- 18 Keypads 97
- Keypad ARM Areas 99
- P74E 1-8E 1-2E 99
- Keypad ARM Access 99
- P75E 1-8E 1-8E 99
- Keypads 100
- Keypad STAY Areas 100
- P76E 1-8E 1-2E 100
- Keypad STAY Access 100
- P77E 1-8E 1-8E 100
- Keypad A Key Areas 101
- P78E 1-8E 1-2E 101
- Keypad A Key Options 101
- P79E 1-8E 1-8E 101
- Keypad B Key Areas 102
- P80E 1-8E 1-2E 102
- Keypad B Key Options 102
- P81E 1-8E 1-8E 102
- 18.8 Keypad to output mask 103
- 18.12 Keypad chime timer 105
- 19 Key-switches 107
- Key-switches 108
- Keyswitch Access 108
- P112E 1-2E 1-8E 108
- 20 Zones 109
- Zone B Options 111
- P123E 1-16E 1-8E 111
- Zone C Options 112
- P124E 1-16E 1-8E 112
- 20.9 Zone timing settings 118
- 20.9.2 Retrigger time 119
- 21 Time zones 121
- 22 Dialer 123
- Dialer B Option 124
- P175E 2E 1-8E 124
- 22.2 Auto answer ring count 125
- 22.3 Test call options 125
- 22.5 Dialing pre-fix numbers 127
- 23 Telephone numbers 129
- Telephone numbers 130
- Phone Options 131
- P183E 1-8E 1-8E 131
- 23.5 Dial progress options 132
- Phone B Reporting 133
- P187E 1-8E 1-8E 133
- Phone C Reporting 133
- P188E 1-8E 1-8E 133
- Phone D Reporting 134
- P189E 1-8E 1-8E 134
- Divert Options 136
- P193E 1-2E 1-8E 136
- 24 4 plus 2 program options 137
- 4 plus 2 program options 138
- 26 Contact ID code summary 141
- 27.5 Reset back to defaults 146
- 27.6 Start a call-back call 147
- 27.7 Installer code 147
- 28 User privileges chart 148
- User privileges chart 149
- 30.1 Installer menu 151
- 30.2 Installer: Users 152
- 30.3 Clock settings 153
- 30.4 Phone numbers 154
- 30.5 Dialer 155
- 30.6 Areas 156
- 30.7 Zones main 157
- 30.8 Zones outputs 158
- 30.9 Keypads 159
- 30.10 Outputs 160
- 30.11 Keyswitch 161
- 30.12 Miscellaneous 162
- 30.13 4+2 event codes 163
- 30.14 SIA event codes 164
- 30.15 Diagnostics 165
- 31 Support 166
- Support 171
- After a voice alarm ...: 171
Related products and manuals for Security access control systems Siemens IC60
(50 pages)
(184 pages)© 2020, manymanuals.com. All rights reserved. | 0.028 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals