Siemens SISTORE AX9 User Manual download pdf (Page 55)

Configuration

3.9.2 Main Monitoring Setup Screen

You can adjust the display dwell time for each camera displayed on the main

monitor. You can also turn camera sequence and event monitoring on and off.

Fig. 58 Main Monitoring Setup screen.

z Highlight the box beside Sequence Dwell Time and press the button. You

can adjust the display dwell time from 3 to 60 seconds.

z Highlight the box beside Sequence in Cameo and press the button to toggle

between On and Off.

z Pressing the Sequence button causes the DVR to sequence cameras, and the

DVR can sequence cameras in two modes: “Page” and “Cameo”. In the Page

mode, the DVR sequences through user-defined screen layouts (pages). In the

Cameo mode, the bottom right window in a multi-screen format sequences

through all cameras.

NOTE:

The DVR does not sequence the camera having video loss in the Cameo mode.

You can define the screen layout in a variety of formats and set the DVR to

sequence through the different screen layouts (pages) so that all the cameras will

be displayed. You can also set up the DVR to display one camera or a group of

cameras all the time while cycling through the remaining cameras in a “cameo”

window. This can be done with one camera displayed full screen while displaying

the cameo window as a PIP (picture in picture), or displaying the cameras in a grid

pattern with the bottom right window as the cameo.

NOTE:

Sequence cannot be used in the 4 x 4 display mode of the 16-channel and 3 x 3 mode of the

9-channel DVR.

z Highlight the box beside Event Monitoring and press the button to toggle

between On and Off. When On, video from the lowest camera number among

those associated with the sensor that detected the event will be displayed full-

screen on the monitor for the preset dwell time.

z Highlight the box beside Event Monitoring Dwell Time and press the button.

Select the event monitoring dwell time from 3 to 60 seconds.

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 91 92

No comments

Siemens SISTORE AX9 User Manual Page 55