Siemens SISTORE AX9 User Manual download pdf (Page 20)

Installation

2.15 Connecting the Power Cord

Fig. 16 Power cord connector.

Connect the DC power cord of the adaptor to the DVR, and connect the AC power

cord to the adaptor and then to the wall outlet.

NOTE:

The power cord connector locks into position to prevent accidental power loss. Be sure to slide the

release away from the socket before removing the plug.

WARNING

ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD.

MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED

BY FURNITURE. DO NOT INSTALL POWER CORDS UNDER RUGS OR

CARPET.

THE POWER CORD HAS A GROUNDING PIN. IF YOUR POWER OUTLET

DOES NOT HAVE A GROUNDING PIN RECEPTACLE, DO NOT MODIFY THE

PLUG.

DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES IN

TO ONE CIRCUIT.

Your DVR is now ready to operate.

Refer to Chapter 3 - Configuration and Chapter 4 - Operation.

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

No comments

Siemens SISTORE AX9 User Manual Page 20