Siemens SISTORE AX9 User Manual download pdf (Page 85)

Appendix E — Connection Diagram

9.3 Sample III. Connecting the SISTORE AX and SCU

RS485

RS232-RS485

Converter

RS232-Current

Loop Converter

AXAX9/AX16

TTY

CDC0402PT40P

Configuration of SISTORE AX:

z In the RS232/RS485 menu:

RS485: Baud Rate: 2400

Parity: Even

Data: 8

Stop: 1

Usage: PTZ Control

z In the „Camera“ menu:

Camera setting:

PTZ Device: Siemens SCU

ID: 1

Configuration of the Roline RS232<->RS485 Converter:

z T-RTS

Rx ON

z DTE (or DCE; must not be identical with the other converter)

Configuration of the RS232<->Current Loop Converter:

z 20 (mA)

z Rx ACT (Active)

z Tx ACT (Active)

z DCE (or DTE; must not be identical with the other converter)

(If the two converters are connected using a cross-over cable,

either DCE or DTE must be set on both converters.)

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 91 92

No comments

Siemens SISTORE AX9 User Manual Page 85