Siemens SISTORE AX9 User Manual download pdf (Page 82)

Appendix C — Troubleshooting

7 Appendix C — Troubleshooting

Problem Possible Solution

No Power z Check power cord connections.

z Confirm that there is power at the outlet.

No Live Video z Check camera video cable and connections.

z Check monitor video cable and connections.

z Confirm that the camera has power.

z Check camera lens settings.

Live Video Very Bright If a cable is attached to the “Loop” connector, make certain it is

connected to a properly terminated device.

REC LED is Lit but DVR is

not recording

Unit will only record video based on the parameters such as

schedule and events defined during configuration. REC LED

indicates the DVR is ready to record.

DVR has stopped

recording

If hard disk drive is full, you will either need to delete video or set the

DVR to the Overwrite Mode.

DVR displays an error

message stating that the

last recorded image date

and time is later than the

current date and time

setting of the DVR.

The DVR will automatically reset the time and date of the unit,

according to the time and date of the last recorded image.

If this is

not the correct time and date, reset the time and date manually. If

the correct time and date is earlier than the last recorded image, any

video with a later time and date will be lost when resetting the correct

time and date.

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 91 92

No comments

Siemens SISTORE AX9 User Manual Page 82