Siemens SISTORE AX9 User Manual download pdf (Page 37)

Configuration

You can assign titles to each camera by highlighting the camera title box and

pressing the

button. A virtual keyboard allows you to enter camera names.

Selecting the PTZ Device box causes a list of controllable cameras to display.

Select your camera from the list and press the

button. You will need to connect

the camera to the RS485 terminal on the back of the DVR following the camera

manufacturer’s instructions.

Fig. 35 PTZ Device list.

You can assign IDs to each camera by highlighting the ID heading and pressing

the

button. Change the number by highlighting it and using the Up and Down

arrow buttons to increase and decrease the number. The PTZ ID number can be

set from 0 to 256.

3.6.2 Alarm In Setup Screen

Highlight Alarm In in the Main menu and press the button. The Alarm In setup

screen appears.

Fig. 36 Alarm In setup screen.

The alarm terminal strip on the back of the DVR has inputs associated with each

alarm. You can set up each input on the Alarm In Setup screen. The inputs are

displayed in groups of four. You can turn each input On or Off. Each input can be

given a title, and the inputs can be set as NO (normally open) or NC (normally

closed) independently.

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 91 92

No comments

Siemens SISTORE AX9 User Manual Page 37