Siemens SISTORE AX9 User Manual download pdf (Page 32)

Configuration

3.5.3 System Check Screen

Highlight System Check in the Main menu and press the

button. The System

Check setup screen appears.

Fig. 29 System Check screen.

z Highlight the box under the On/Off heading and press the

button. This

toggles between On and Off. When it is On, the DVR reports a fault condition if

it does not detect any recording or if there is an alarm during the designated time.

z Highlight the box under the Interval heading and press the

button. A slide bar

appears allowing you to set the check interval from 1 Hour to 30 Days by using

the Left and Right arrow buttons.

z The Status field displays the fault conditions. When it is Good, there was

recording or an alarm occurred during the designated time. When it is Bad,

there was no recording or no alarm occurred during the designated time.

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 91 92

No comments

Siemens SISTORE AX9 User Manual Page 32