Siemens SITRANS LR 300 Instruction Manual download pdf (Page 44)

Page 42 SITRANS LR 300 – INSTRUCTION MANUAL 7ML19985CL02

mmmmm

Start Up

Direct Address

In PROGRAM mode, you can access a parameter directly by entering its number.

Modifying a Parameter Value

Once a parameter is accessed, you can set or modify its values.

Changing Parameter Values

1. Press the PROGRAM key

followed by the TOGGLE key

display the Parameter Number field.

2. Press the TOGGLE key

to open

the Parameter Number field. The

Parameter Number field goes blank

and the EDIT icon appears.

3. Key in the desired parameter number.

Example:

. The new

parameter number and value appear.

1. Select the parameter to modify.

2. Key in the new value. Example:

press

. The new value and the

EDIT icon appear.

3. Press the ENTER key to set the

value. The EDIT icon disappears.

Note: You can enter parameter numbers below 100 without leading zeros. Enter the

number followed by the ENTER key. Example: To access P005, press .

Notes:

• Security must be disabled. To disable security, set P000 to 1954.

• Values shown are for demonstration purposes only.

• Invalid entries will be rejected or limited.

Note: The CANCEL key

can be used to clear the field.

Value

Value entry field

SITRANS LR 300.book Page 42 Monday, June 10, 2002 7:18 PM

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 139 140

No comments

Siemens SITRANS LR 300 Instruction Manual Page 44