Siemens SITRANS LR 300 Instruction Manual Page 33
- Page / 140
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
7ML19985CL02 SITRANS LR 300 – INSTRUCTION MANUAL Page 31
mmmmm
Installation
Mounting: Stillpipe or Sidepipe
This is an alternative to the waveguide antenna option, used for products with an ε
r
less
than 3 or for extremely turbulent or vortex conditions. This mounting arrangement can
also be used to provide optimum signal conditions on foaming materials.
Suitable pipe diameters are 50mm (2”) to 250mm (10”). A rod antenna or a horn antenna
may be used.
Smoothness
One continuous length of metallic pipe is preferred, without joints. If joints are
unavoidable, you must machine them to close tolerances (± 0.25mm [± 0.010”]) and weld
a connecting sleeve on the outside.
See P655 on page 68 for the related propagation factor.
Ensure there is a vent at the upper end of the side pipe to equalize pressure and keep the
liquid-level in the pipe constant with the liquid-level in the vessel.
Suitable pipe diameters
are 50mm (2”) to
250mm (10”).
You can use either a
rod or horn antenna.
Vent hole
SITRANS LR 300.book Page 31 Monday, June 10, 2002 7:18 PM
- SITRANS LR 300 1
- Disclaimer of Liability 2
- Table of Contents 3
- General Information 7
- Performance 10
- Mechanical 10
- Approvals on page 10 11
- Specifications 12
- Programmer (remote keypad) 13
- Installation 15
- Beam Spreading 16
- Polarization Effect 16
- False Reflections 16
- Dimensions: Threaded Rod 19
- Dimensions: Shielded Rod 20
- Dimensions: Horn 21
- Dimensions: Waveguide 22
- Dimensions: Sanitary Horn 25
- Dimensions: Sanitary Rod 26
- Dimensions: Flanges 27
- Mounting 29
- Rod Assembly 30
- Rod Extension Requirements 30
- Mounting: Rod Assembly 30
- Mounting: Manhole Covers 31
- Mounting: Waveguide Antenna 32
- Smoothness 33
- Interconnection 35
- SITRANS LR 300 Wiring 36
- Communications Installation 37
- PC Connection 38
- Port Configuration 38
- Start Up 39
- Programming 40
- Hand Programmer 41
- Local Programming 41
- Key Programming Mode Run Mode 42
- Accessing PROGRAM Mode 43
- Accessing a Parameter 43
- Modifying a Parameter Value 44
- Accessing RUN Mode 45
- Quick Start Programming 45
- Operation 47
- Loss of Echo (LOE) 48
- Analog Output 49
- RUN/PROGRAM 50
- Application Examples 51
- Applications 52
- Parameter Enter 52
- Horn Antenna 53
- Digesters 54
- Parameter Descriptions 57
- P001 Operation (F = 3) 58
- P002 Material 58
- P004 Antenna (F = 240) 59
- P005 Units (F = 1) 59
- P006 Empty (F = 10m) 59
- P007 Span (F = 10m) 59
- P050 Tank Shape (F = 0) 60
- (F = – – – –) 63
- P060 Decimal Position (F = 2) 64
- Material Level 65
- Parameters 67
- Related Parameters 67
- P219 mA Output Fail-Safe 68
- P341 Run Time 68
- P342 Power-On Resets 68
- P343 Internal Temperature 69
- P346 Serial Number 69
- P700 Maximum Fill Rate 71
- P701 Maximum Empty Rate 71
- P709 Damping Filter 72
- P711 Echo Lock (F = 2) 72
- P712 Echo Lock Sampling 73
- P770 Serial Protocol (F = 1) 74
- P772 Baud Rate (F = 9.6) 75
- P773 Parity (F = 0) 75
- P774 Data Bits and Stop Bits 75
- P801 Range Extension (F = 5%) 77
- P805 Echo Confidence 77
- P806 Echo Strength 77
- P807 Noise 77
- Algorithm Parameter (P820) 78
- (P830 to P841) 78
- To change a breakpoint: 79
- (or when P837 = 0) 80
- Values (view only) 82
- 0.0000 to 99999 83
- P999 Master Reset 84
- Product ID (R40,064) 85
- Input/Output 86
- Format Word (R43,997) 87
- (R43,998) 88
- Communications: Data Types 89
- Text Messages 90
- Error Handling 91
- Communications 92
- Troubleshooting 93
- Operation Troubleshooting 94
- Maintenance 95
- Appendix I 97
- Appendix II 100
- Number Parameter Name Value 101
- Appendix III 103
- Appendix IV 104
- Appendix V 109
- Appendix VI 110
- HART Communicator 275: 111
- Supported HART Commands: 115
- Appendix VII: Profibus PA 116
- Bus Termination 117
- Power Demands 117
- Cyclic versus Acyclic Data 117
- Cyclic Data 117
- Appendix VII 118
- Status Word 119
- Diagnostics 120
- Acyclic Data 120
- Configuration Example: 120
- Profibus Level Device Design 121
- Transducer Block - Level 122
- Parameter Structure 123
- Linear conversion: 124
- Analog Input Function Block 124
- Device Management 125
- Physical Block 1 126
- Transducer Block 1 127
- Function Block 1 - Level 131
- Function Block 2 - Space 132
- Function Block 3 - Distance 133
- Function Block 4 - Volume 133
- Annex II, 1/0/6) 134
- Appendix VIII 136
- *7ml19985cl02* 140
Related products and manuals for Radar detectors Siemens SITRANS LR 300
(126 pages)© 2020, manymanuals.com. All rights reserved. | 0.325 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals