Page 10 SITRANS LR 300 – INSTRUCTION MANUAL 7ML19985CL02
mmmmm
Specifications
Process
• material dielectric: ε
r
> 1.8
for ε
r
< 3, you should use a waveguide antenna or stillpipe
(see Mounting: Waveguide Antenna on page 30 , or
Mounting: Stillpipe or Sidepipe on page 31)
• temperature: UHMW-PE −40 to 80°C (−40 to 176°F)
PTFE −40 to 200°C (−40 to 392°F)
1
• pressure (vessel): dependent on process connection type and temperature
(refer to Appendix IV on page 102 for charts, or obtain
the reference drawing listed on the device process tag)
Approvals (verify against device nameplate)
•General: CSA
US/C
, FM, CE, 3A Sanitary
• Radio: Europe, Industry Canada, FCC
• Hazardous: Europe; EEx de IIC T6
ATEX II 1/2G, EEx de IIC T6 or EEx d IIC T6
U.S.; Class I, Div. 1, Gr. A,B,C,D (Class I, Zone 1, IIC T6)
Class II, Div. 1, Gr. E,F,G
Class III
Canada; Class I, Div. 1, Gr. A,B,C,D (Class I, Zone 1, IIC T6)
Class II, Div. 1, Gr. E,F,G
Class III
WARNING: This product is designated as a Pressure Accessory per
Directive 97/ 23 / EC and is not
intended for use as a safety device.
Notes:
•See Appendix III, Ambient/Operating Temperature Specification, on page 101, and
Approvals on this page, for the specific configuration you are about to use or install.
• For instructions relating to ATEX-approved instruments, please see Appendix VIII:
hazardous area installations on page 132.
SITRANS LR 300.book Page 10 Monday, June 10, 2002 7:18 PM
Comments to this Manuals