Using the Optiset E Liberator Phone 4-3
4. Using the Optiset
E Liberator Phone
Changing the Audio Settings
Use the Volume key to control the loudness of the handset, headset, or
ringer.
To adjust the
loudness of your
handset or head-
set
➩
During Talk mode (occurs when there is
activity on the phone), press the Volume
key to toggle between the two volume
levels.
To adjust the
loudness of your
ringer
➩
During Standby mode (occurs when there
is no activity on the phone for one minute),
press the Volume key to select the ringer
setting.
To disable the
ringer and the vi-
brator
➩
Set the switch on the left side of the handset
to the OFF position. When the ringer is
turned OFF, only the LED flashes when
you have incoming call.
To turn the vibra-
tor on
➩
Set the switch on the left side of the handset
to the ON position.
➩
Press the Volume key until you see “Ring
Off” on the display.
Flash and Pause
Some communications server features such as Repertory Dialing
(Repdial) and Station Speed Dialing occasionally require the use of a
flash or pause in the dialing sequence. The flash and pause serve
different functions for the communications server.
Flash may be required as the first element of some feature access codes
by the communications server. This function is necessary for features
where you start out with a call on your line, such as Automatic Privacy,
Bad Line Reporting, Park, and Privacy. A flash alerts the
communications server that a command is to be issued from the key
pad.
Comments to this Manuals