Siemens Advance Conference Telephone Troubleshooting Guide Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 242
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
1-10 Optiset E Administrator Guide
Installing Your Optiset E Liberator Telephone
The base unit of the Optiset E Liberator phone can be placed on a desk
or tabletop near a standard 120V AC outlet and telephone line jack.
The base unit and charging unit can also be mounted on a wall. Select
a location for the Optiset E Liberator phone to limit exposure to
excessive heat or humidity. Keep the base unit and handset away from
sources of electrical noise such as motors, fluorescent lighting, or
computers.
Before Installation
CAUTION:
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Connect the
telephone line
Plug the telephone line cord from the base
unit into a standard modular telephone
jack. Make sure the phone jack supports
the U
P
0/E
digital interface of the
communications server.
Apply power to
the base unit
Plug one end of the AC adapter into the
base unit and the other end into a standard
120V AC electrical outlet.
Apply power to
the charging unit
Plug one end of the AC adapter into the
charging unit and the other end into a
standard 120V AC electrical outlet.
Attach the belt
clip to the handset
Lift the tab out of the belt clip notch on the
top of the handset.
Slide the clip into the tab slot.
Press firmly until it snaps into place.
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 241 242

Comments to this Manuals

No comments