1-12 Optiset E Administrator Guide
Wall Mount Installation
The base unit of the Optiset E Liberator telephone is designed to be
mounted on a standard wall plate or directly on a wall.
Standard Wall Plate Mounting
Attach the wall
mount stand to
the base unit
➩
Slide the wall mount stand into the notches
at the top of the base unit. Rotate the wall
mount stand down and snap it into place.
Attach the AC
adapter cord to
the base unit
➩
Plug one end of the AC adapter into the
base unit. Place the AC adapter cord inside
the molded channel of the wall mount
stand.
Connect the
telephone line
➩
Plug one end of the telephone cord into the
line jack on the base unit. Then place the
telephone cord inside the molded channel
on the bottom of the wall mount stand.
➩
Plug the other end of the telephone cord
into the modular wall jack. Make sure that
the phone jack supports the U
P0/E
digital
interface of the communications server.
Install the base
unit on the posts
of the wall plate
➩
Place the base unit on the posts of the wall
plate and push down until it is firmly
seated.
Apply power to
the base unit
➩
Plug the AC adapter into a standard 120V
AC electrical outlet.
Note:
Do not use an outlet controlled by a wall switch.
Comments to this Manuals