Siemens Hicom 118 Service Manual download pdf (Page 284)

A31003-K16-X001-3-7620, 07/99

Hicom 100 E Version 2.1, Service manual

11-1

Answering machine

Plus products

11 Plus products

11.1 Answering machines

Answering machines are connected to an a/b port of the PBX. Enter the answering machine

(code 4) in the "Extension Data Menu under code

13 11

(station type) in "System administrati-

on".

A call to the answerphone can be intercepted by any optiset phone having a DSS appearance

of that answerphone.

An info key can be programmed, i.e. if a call has been recorded by the answering machine, a

LED remains lit up until the call is retrieved.

For more information, please refer to the appropriate manufacturer specifications.

11.2 Voice mail

11.2.1 Memo for Hicom

Conditions:

Memo connects to the Hicom 100E via a/b ports. The status of the system software should be

(at least) J1/J2 in Hicom and S01.00 D in Memo.

General:

Memo for Hicom is connected to Hicom 108/112/118 via two analogue extension ports.

The a/b ports are configured to suit Memo by entering "Voicemail" as the station type. An inco-

ming call is intercepted by Memo. Hicom 100 E then sends a DTMF sequence. This contains

information identifying the extension which made the call, for example, and whether the call was

forwarded or transferred. Memo, in turn, sends the DTMF character *68 <extension number> 0

to the extensions to signal that a message is waiting.

When you enter the password "# 5 9 5 " in the Memo Technical support menu (wrench), the

DTMF characters are also listed in the upper left-hand corner.

Setup information:

1. The ports are entered as "Voicemail" (2) under "Station type" (13 11).

2. A cyclic huntgroup must be set up for all ports (15 16 1/2).

3. The hunting group is to be assigned a name (15 16 3).

4. Each extension port is also to be assigned a name (13 12).

5. The hunting group is entered for destination 1 in a free call destination list (15 19 1).

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 333 334

No comments

Siemens Hicom 118 Service Manual Page 284