Siemens Hicom 118 Service Manual download pdf (Page 219)

Station attributes

Programming guide

A31003-K16-X001-3-7620

07/99

10-24

Hicom 100 E Version 2.1, Service manual

10.5.1.12 Station names

Each extension can be assigned a name which then appears on the system telephone’s

display.

An optiset (E) memory telephone is necessary to enter station names.

Example

: ext. 11 is to be called "CO"

10.5.2 Doorphone setup

10.5.2.1 Setting up an entrance telephone (up to SW 2.0.1+)

An entrance telephone can be connected to a free a/b extension port. The number of the

entrance telephone extension is programmed for this purpose.

The entrance telephone must be connected via a door opener adapter if the receiving extension

for the doorbell and the door opener features are to be used.

+ Scroll to the next station Group 1, station 3: -

* Change input Group 1, station 3:

14 Secretary telephone is ext. 14 Group 1, station 3: 14

<OK> Confirm input Group 1, station 3: 14

<F8> Return to Start menu System administration

Members can be deleted from an executive-secretary group by pressing the F3 key under

points C and H.

Input sequence Meaning Display

A 1 3 2 (up to 2.0.1+)

1 3 1 2 (as of 2.0.2)

Name for ext. 11

(scroll through ext. 12–74 using "+"

and "–" or call directly with "#")

Ext. 11: -

Change input Ext. 11:

CCO

Name for ext.11 = CO Ext. 11: CO

D<OK>

Confirm input Ext. 11: CO

<F8> Return to Start menu System administration

An existing extension name can be deleted by pressing the F3 key under point C.

Input sequence Meaning Display

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 333 334

No comments

Siemens Hicom 118 Service Manual Page 219