Siemens Hicom 118 Service Manual download pdf (Page 112)

Re-initialisin

A31003-K16-X001-3-7620, 07/99

Hicom 100 E Version 2.1, Service manual

6-3

Initial operation

6.4 Re-initialising

6.4.1 Re-initialising the system cards (as of SW 2.0.1+)

The system is returned to its pre-initialisation status with a redefined password. The data

contained in the EEPROM regarding the system configuration is erased, and the configuration

status can be changed as required. Existing customer-specific data is not changed.

If expansion work requiring re-initialisation of the extension number plan is carried out, proceed

as follows:

●

Enter the re-initialisation password before making the change to ext. 11 > the existing mod-

ule configuration will be erased.

●

Disconnect the system, release and remove the PSU/UPS, plug in new module(s).

●

Insert and screw PSU/UPS, connect the system, the extension number plan will be set up

with no gaps as in the case of initial activation.

The extension number plan will be changed, see Extension and line number allocation.

6.4.2 Re-initialising the expansions modules (as of SW 2.0.2)

Optional modules are automatically recognised when the system is connected and booted.

This data is stored in the EEPROM.

A special password must be entered in order to modify an option that is connected and

recognized. After entering this password and resetting the system, the modules currently

connected are recognized by the system.

Existing messages stored in FAX/DUWA module(s) are erased.

Password for re-initialising

system cards

Enter code for "System

administration".

62659321

*95

Password for re-initialising

modules

Enter code for "System

administration".

73855392

*95

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 333 334

No comments

Siemens Hicom 118 Service Manual Page 112