Siemens Hicom 118 Service Manual Page 212
- Page / 334
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Programming extension
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-17
Programming guide
10.4.1.3 Stations connected to the S
0
bus
At least one free ISDN port (module STLS 2 or 4) is necessary to connect an internal ISDN
extension. A maximum of 8 ISDN extensions (stations) can be connected to an internal S
0
bus
(see installation instructions "S
0
ext." in the Service Manual). The station type is programmable
for each of these 8 possible extensions (input sequence see "Stations at the a/b port" Section
10.4.1.2)
The required extension number is to be programmed on the ISDN terminal as its own MSN and
is accepted by Hicom 100E. Collisions with other Hicom 100E internal extension numbers are
to be avoided when selecting the extension number! The ISDN port in question is to be
programmed as a "Euro bus".
Example
: ISDN port 4 is to become an internal S
0
bus, Section 10.1.1.2
The port only uses DTMF dialling if the station type is set to "answering machine"–
required for announcement equipment, e.g. "Genius".
Input sequence Meaning Display
A1 9 3
Port configuration of port 1
(select port 1 to 16 with "+" and "–" or
directly with "#")
Port 1: automatic
B+
Port configuration of port 2 Port 2: automatic
C+
Port configuration of port 3 Port 3: automatic
D+
Port configuration of port 4 Port 4 automatic
E*
Change input Port 4:
F
4 Euro bus Port 4: Euro bus
G
<OK> Confirm input Port 4: Euro bus
H<F8>
Return to Start menu System administration
As of SW 2.0.2, the "Default" display will be replaced by "Automatic".
A supplementary PSU is required for an ISDN telephone.
- Hicom 100 E 1
- Hicom 108 1
- Hicom 112 1
- Hicom 118 1
- Hicom 118-2 1
- Siemens Aktiengesellschaft 2
- Table of Contents 0 4
- 10
- Tables 0 16
- 1 Important Information 18
- Safety information 19
- Safety informatio 20
- 1.1.4 General information 22
- 1.1.6 Accident reporting 23
- Important Information 25
- 2 System data 26
- 2.2 Hardware overview 27
- 2.3 Documentation 28
- 2.4 System types 29
- 2.5 Hicom 108 system overview 30
- 2.6 Hicom 112 system overview 31
- 2.7 Hicom 118 system overview 32
- 2.8 Technical data 33
- Technical dat 34
- 2.10 System interfaces 35
- 3 Overview of modules 36
- Table of item code number 38
- Overview of configuration 40
- 3.4 Main module - motherboard 45
- Main module - motherboar 46
- Main module - motherboard 47
- 3.5.3 SLU8 (subscriber line U 52
- 3.6.1 Options adapter 56
- 3.6.2 GEE module 56
- 3.6.6 ALUM module 62
- HICOM 100 E 63
- 3.6.7 STBG4 module 64
- 3.7.1 EXM/MPPI 65
- 3.7.3 Coarse protection 68
- 3.8 Power supply (PSU/UPS) 69
- Power supply (PSU/UPS 70
- 3.9 Main distribution frame 71
- 4 Features 72
- 4.3 All traffic modes 73
- 4.4 Incoming traffic, general 74
- 4.6 General trunk traffic 76
- 4.7 Incoming trunk traffic 76
- 4.8 Outgoing trunk traffic 77
- 4.9 Least cost routing 78
- 4.10 Internal traffic 79
- 4.11 Miscellaneous 80
- Miscellaneous 81
- 4.13 Configuration 82
- 4.15 Cordless solutions 83
- 4.16 CorNet-N 83
- 4.17 Q-Sig networking 84
- 4.18 Euro-ISDN to PBX 84
- 4.19 Euro-ISDN to extension S 85
- 4.20.1 MSN feature 86
- 5 Installation 90
- 5.3 Power supply 91
- 5.3.1 PSU1/UPS1 power supply 92
- 5.3.2 Battery for UPS1 92
- 5.3.3 PSU2/UPS2 power supply 92
- 5.3.4 Battery for UPS2 93
- Power suppl 94
- 5.6 Connecting ISDN (S 97
- ) interfaces 97
- 5.7 Connecting to ISDN trunk 97
- 5.9 Connecting ISDN terminals 98
- Connecting ISDN terminals 99
- Connecting ISDN terminal 100
- extensions 101
- 5.11 Multi-device connection 101
- A31003-K16-X001-3-7620 103
- Length approx. 300 cm 105
- Connecting the fax DDI module 109
- 6 Initial operation 110
- 6.3 Nationalisation 111
- 6.4 Re-initialising 112
- 6.5 Customer data 113
- 6.6 Terminal test 113
- 6.8 System extension number 114
- 6.9 Call management (CM) 115
- 6.9.1 Call allocation 115
- 6.9.3 Call destination lists 115
- Call management (CM 116
- Call management (CM) 119
- Head office Office A 127
- Office B 127
- 6.11 Upgrading a system 129
- Initial operation 131
- 7.1 Configuring the system 132
- Codes for accessing service 134
- Codes for accessing services 135
- MENÜ ENDE WAHL 139
- 7.6.2 Codes for expert mode 140
- With or without decimal point 164
- Assigned ext 171
- 7.8 System programming via PC 174
- 7.8.1 PC tool 174
- 7.9 Teleservice 175
- 7.9.1 Modem transfer 175
- Teleservic 176
- 7.10 Classes of service 179
- Classes of servic 180
- 7.11 Toll restriction 181
- 7.11.2 Toll restriction data 181
- 7.12 Timer 182
- 8 Least Cost Routing (LCR) 184
- 8.1 Single-stage LCR 186
- 8.2 Two-stage LCR 187
- 8.3.1 Background/General 188
- 030-904711 189
- 030-56473 189
- 089-72238321 189
- 9 Maintenance and repair 194
- Spare parts 195
- 10 Programming guide 196
- Programming ISDN lines 197
- Programming ISDN line 198
- 10.2 Analogue trunk 199
- 10.2.2 Setting a dial pause 200
- 10.2.4 Changing line length 201
- 10.3 Networking 202
- 10.3.1 CorNet-N networking 202
- 10.3.2 Rerouting 203
- 10.3.3 Analogue networking 204
- Networking 205
- 10.3.5 Route assignment 206
- 10.3.6 Route type 207
- 10.3.7 Route overflow 208
- 10.3.8 Digit repetition 208
- 10.3.9 Route seizure 209
- 10.3.10 Route names 210
- 10.4 Programming extensions 211
- 10.4.1 Station types 211
- Programming extension 212
- 10.5 Station attributes 213
- Station attribute 214
- Station attributes 215
- 10.5.2 Doorphone setup 219
- 10.5.4 Trunk access 225
- 10.6 Call management 234
- 10.6.1 DDI numbers 234
- 10.6.2 Call groups 234
- 10.6.7 Call destination lists 241
- 10.6.8 ISDN DDI settings 246
- 10.7 System settings 252
- 10.7.1 Music on hold 252
- 10.7.2 Telephone directory 252
- System settings 253
- System setting 254
- 10.7.13 Codes 260
- 10.7.14 Displays 263
- 10.7.15 Call detail recording 267
- 10.8.1 Programming actuators 271
- Programming expansion module 272
- 10.8.2 Programming sensors 273
- Programming expansion modules 275
- 11 Plus products 284
- Voice mail 285
- 11.3 Entrance telephones 286
- Entrance telephones 287
- Entrance telephone 288
- 11.3.3 TFE/V adapter 294
- 11.5 Multiplexers 304
- 11.6 PC cards 304
- PC cards 305
- General system descriptio 306
- General system description 307
- 12.1.3 Important notes 308
- 12.2 System data 308
- 12.2.2 System types 309
- System dat 310
- System data 311
- 12.2.9 Technical data 315
- 12.4 Power supply 324
Related products and manuals for Mobile phones Siemens Hicom 118
Mobile phones Siemens CF75 User Manual
(76 pages)
(76 pages)
Mobile phones Siemens Gigaset S56 User Manual
(202 pages)
(202 pages)
Mobile phones Siemens M30 User Manual
(8 pages)
(8 pages)
Mobile phones Siemens SXG75 User Manual
(12 pages)
(12 pages)
Mobile phones Siemens A52 User's Guide
(81 pages)
(81 pages)
Mobile phones Siemens A40 User's Guide
(43 pages)
(43 pages)
Mobile phones Siemens CT56 User's Guide
(111 pages)
(111 pages)
Mobile phones Siemens S6 PCN User Manual
(160 pages)
(160 pages)
Mobile phones Siemens 3000 V3.0 User Manual
(63 pages)
(63 pages)
Mobile phones Siemens CV65 User's Guide
(141 pages)
(141 pages)
Mobile phones Siemens 4010 Service Manual
(42 pages)
(42 pages)
Mobile phones Siemens 3000 V3.0 Specifications
(762 pages)
(762 pages)
Mobile phones Siemens XT55 Specifications
(116 pages)
(116 pages)
Mobile phones Siemens A62 User Manual
(16 pages)
(16 pages)
Mobile phones Siemens CX65 User's Guide
(141 pages)
(141 pages)
© 2020, manymanuals.com. All rights reserved. | 0.179 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals