Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005 User Manual download pdf (Page 45)

Chapter 3

Command Summary

Command Descriptions

Description

This chapter is intended for maintenance personnel.

This chapter provides definitions for all of the commands you will be

using for setup purposes or for performing test diagnostics.

Unique Commands

These are the commands that are unique to the ANCB.

config address ip

ipaddr

Set the ANCB IP address.

config address

ethernet eaddr

Set the ANCB Ethernet hardware address.

config display

Display the current ANCB non-volatile

parameters.

config netmask

xxx.xxx.xxx.xxx

Set the ANCB IP subnetwork.

config iproute

routeaddr

Set the default router IP address.

display links

Display link state table.

hdlc setuptime

Display and/or change the hdlc setuptime in

microseconds.

hdlc window

Display and/or change the hdlc window.

download

Download new software via Configuration

port.

list

List next 22 log events.

list nnn

List 22 events, starting with number nnn.

list nnn, xxx

List xxx events, starting with number nnn.

list on

Continuously list events from the log buffer,

as they are added (terminate by pressing any

key).

list clear

Clear all events from log buffer.

remoteaddr

2000592-001 Command Summary • 35

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 71 72

Comments to this Manuals

No comments

Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005 User Manual Page 45

Comments to this Manuals

Related products and manuals for Hardware Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005