Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005 User Manual download pdf (Page 51)

Command Descriptions, Continued

local> list 155

155 | Trace enabled | 00:01:48.23

156 | IP-172.16.9.211 | IP-172.16.9.210 | 64 | 2 | 00:01:48.29

157 | IP-172.16.9.211 | IP-172.16.9.210 | 64 | 2 | 00:01:49.00

158 | IP-172.16.9.210 | IP-172.16.9.211 | 64 | Ethernet | 00:01:49.75

159 | IP-172.16.9.211 | IP-172.16.9.210 | 64 | 2 | 00:01:50.11

160 | Station detected IP-172.16.9.014 | 00:02:00.00

161 | IP-172.16.9.014 | IP-172.16.9.210 | 1536 | 5 | 00:02:18.29

162 | IP-172.16.9.211 | IP-172.16.9.210 | 1536 | 2 | 00:02:18.00

163 | IP-172.16.9.210 | IP-172.16.9.211 | 1132 | Ethernet | 00:02:19.75

164 | IP-172.16.9.211 | IP-172.16.9.210 | 64 | 2 | 00:02:20.11

The event display gives a time-stamp, and an event description. All

events other than frame-capture events are always shown as single

lines. Captured frames may be summarized as single lines, or expanded

into a multi-line display.

Time stamps are shown as elapsed time from the last board reset or

power-on.

The user can view more than 22 messages by supplying at sequence

number and list length:

list 1, 300 List message numbers 1 – 300.

The list length may appear by itself:

list , 32

This lists the next 32 trace buffer entries and increments the current

message number by 32.

All the messages in the internal trace buffer can be viewed by listing

sequence number one then entering the list command until the last

message is displayed. When the current message number is

incremented to the last message in the internal buffer, it is automatically

set to 1.

There is a continuous listing mode for monitoring all the messages in the

internal trace buffer. It is set by entering list on. All the messages in the

internal buffer will be displayed and any new messages will be listed as

soon as they are collected into the buffer. Hitting any key terminates the

continuous listing mode.

To clear all events from the event buffer, use

list clear

2000592-001 Command Summary • 41

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 71 72

No comments

Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005 User Manual Page 51