Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005 User Manual Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
Setting Network Address
Description
This section provides instructions to configure the ANCB/DN.
Command Line
Definitions
Chapter 3, Command Line Summary, provides definitions for all of the
commands you will be using in this chapter.
Instructions
1. Connect a standard 9-pin COM cable from the designated PC COM
1 to the RS232 Configuration Connector on the ANCB (see Figure
4-1).
2. Open Windows HyperTerminal program on your PC; reference
Configuring Your PC, page
22.
3. Connect and Log on to Advance Maxum ANCB; reference
Establishing a Connection, page
27.
The Connect Screen will appear with the login information and the
local prompt. The local prompt indicates that you are communicating
with the unit connected directly to the PC.
Ver 1.0
30 Data Communications Setup 2000592-001
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 71 72

Comments to this Manuals

No comments