Siemens SX Series User's Guide Page 344
- Page / 453
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
344 U41272-J-Z385-3-76
SVP emulation messages X2000 messages
13.2 SVP emulation messages
The messages issued by the SVP emulation start with the message code SVR.
SVR0000 xxxx started with device MM, console NN, iorsf P, BS2-Sys SS
xxxx = IPL, DIPL or VIPL
Meaning
The IPL has been started. BS2000 is loaded from device MM, NN is defined as the console,
the IORSF parameter list P is used and SS is defined as the BS2000 system name.
SVR0001 xxxx returncode: IPL OK
xxxx = IPL, DIPL or VIPL
Meaning
IPL was performed without errors. BS2000 has been started.
SVR0002 xxxx returncode: yyyyyy
xxxx = IPL, DIPL or VIPL
Meaning
IPL was aborted with an error (yyyyyy = cause of error).
Response
Eliminate the error and recommence IPL.
SVR0003 unknown xxxxreturncode: yy
xxxx = IPL, DIPL or VIPL, yy = returncode
Meaning
IPL was aborted with an unspecified error code.
Response
Back up the RMAssist Trace and send it to ITS for diagnosis.
(var/opt/SMAW/X2000/tmp/rma_trace*)
SVR0004 START-xxxx aborted
xxxx = IPL, DIPL or VIPL
Meaning
The IPL has been aborted.
Response
Recommence IPL.
- 1Preface 1
- U41272-J-Z385-3-76 3 3
- ● OSD/XC 5
- 1.2 Target groups 7
- 1.3 Summary of contents 7
- 1.4 Notational conventions 9
- 10 U41272-J-Z385-3-76 10
- U41272-J-Z385-3-76 11 11
- Teleservice 12
- Gate V.24 12
- System Control LAN 12
- Admin LAN 12
- User LAN 12
- U41272-J-Z385-3-76 13 13
- (without SMC) 14
- U41272-J-Z385-3-76 15 15
- 2.4 Notes on security 17
- 2.4.3 FTP access to root 18
- U41272-J-Z385-3-76 19 19
- U41272-J-Z385-3-76 21 21
- U41272-J-Z385-3-76 23 23
- 2.6.1 SX server with SMC 24
- U41272-J-Z385-3-76 25 25
- U41272-J-Z385-3-76 27 27
- 3.1 CDE interface 28
- U41272-J-Z385-3-76 29 29
- 30 U41272-J-Z385-3-76 30
- U41272-J-Z385-3-76 31 31
- 3.3 Preconfiguring terminals 32
- U41272-J-Z385-3-76 33 33
- U41272-J-Z385-3-76 35 35
- 3.3.3 BS2000 console 37
- 3.3.4 BS2000 dialog 38
- /opt/SMAW/bin/wsa `uname -n` 39
- /opt/SMAW/bin/wsa ’uname –n’ 39
- U41272-J-Z385-3-76 41 41
- 42 U41272-J-Z385-3-76 42
- U41272-J-Z385-3-76 43 43
- 4.1 User groups and logins 44
- U41272-J-Z385-3-76 45 45
- 4.1.1 Server administrator 46
- U41272-J-Z385-3-76 47 47
- U41272-J-Z385-3-76 49 49
- U41272-J-Z385-3-76 51 51
- U41272-J-Z385-3-76 53 53
- ServerView) 54
- U41272-J-Z385-3-76 55 55
- 56 U41272-J-Z385-3-76 56
- U41272-J-Z385-3-76 57 57
- 1 <RETURN> 59
- 8 <Return> 61
- 2 <RETURN> 63
- 3 <RETURN> 64
- 1,2 <RETURN> 64
- 4 <RETURN> 65
- 0,1 <RETURN> 65
- 8 <RETURN> 70
- 5 <RETURN> 70
- U41272-J-Z385-3-76 73 73
- 13 <RETURN> 75
- U41272-J-Z385-3-76 77 77
- 6 <RETURN> 78
- U41272-J-Z385-3-76 81 81
- U41272-J-Z385-3-76 85 85
- Figure 34: RC2000 main window 86
- U41272-J-Z385-3-76 87 87
- U41272-J-Z385-3-76 89 89
- .registers 90
- and loads it into the 91
- 4.3.3 Monitoring messages 92
- U41272-J-Z385-3-76 93 93
- U41272-J-Z385-3-76 95 95
- U41272-J-Z385-3-76 97 97
- 4.5.1 SCS configuration data 98
- SMC# touch /reconfigure 99
- 4.5.2 System drive 100
- U41272-J-Z385-3-76 101 101
- U41272-J-Z385-3-76 102
- U41272-J-Z385-3-76 103 103
- U41272-J-Z385-3-76 105 105
- 4.6.1 Methods 107
- 4.6.2 Data backup 108
- U41272-J-Z385-3-76 109 109
- # more /etc/vfstab 110
- # /etc/init.d/inetinit start 111
- # /etc/init.d/rpc start 111
- # /etc/init.d/inetsvc start 111
- #fsck -m /dev/rdsk/c0t0d0s1 111
- 4.6.3 Recovery 113
- 4.7 XSCF 117
- 4.7.2 Access options to XSCF 118
- 4.7.3 Configuration of XSCF 119
- 4.7.4 Accesses to XSCF 121
- U41272-J-Z385-3-76 123 123
- 124 U41272-J-Z385-3-76 124
- U41272-J-Z385-3-76 125 125
- U41272-J-Z385-3-76 127 127
- 5.3 Integrated console 129
- 5.4 LAN console and RCA 130
- U41272-J-Z385-3-76 131 131
- 132 U41272-J-Z385-3-76 132
- 6 Remote operation via PC 133
- U41272-J-Z385-3-76 135 135
- U41272-J-Z385-3-76 137 137
- Figure 50: Xconfig: Editor 138
- U41272-J-Z385-3-76 139 139
- Figure 52: CDE login screen 139
- U41272-J-Z385-3-76 141 141
- Figure 54: SINIX-TE window 142
- U41272-J-Z385-3-76 143 143
- 6.3 Access with Secure Shell 144
- U41272-J-Z385-3-76 145 145
- U41272-J-Z385-3-76 149 149
- U41272-J-Z385-3-76 151 151
- 152 U41272-J-Z385-3-76 152
- 6.4.1 Generating the keys 153
- 6.4.2 Use of SSH agents 155
- U41272-J-Z385-3-76 157 157
- 7 Operating BS2000 instances 159
- U41272-J-Z385-3-76 161 161
- U41272-J-Z385-3-76 163 163
- U41272-J-Z385-3-76 165 165
- U41272-J-Z385-3-76 167 167
- U41272-J-Z385-3-76 169 169
- U41272-J-Z385-3-76 171 171
- U41272-J-Z385-3-76 173 173
- U41272-J-Z385-3-76 175 175
- U41272-J-Z385-3-76 177 177
- U41272-J-Z385-3-76 179 179
- 7.2.4 Inputs 180
- 7.2.5 Outputs 181
- 7.3 EM9750 mode 182
- U41272-J-Z385-3-76 183 183
- U41272-J-Z385-3-76 185 185
- Key (sequence) 9750 186
- Key (sequence) 186
- 7.3.2 BS2000 $DIALOG mode 189
- 7.4 EVENT mode 191
- 7.4.3 Information on patches 192
- 7.4.4 MTC devices 193
- 8 The X2000 user interface 195
- U41272-J-Z385-3-76 197 197
- U41272-J-Z385-3-76 199 199
- U41272-J-Z385-3-76 201 201
- U41272-J-Z385-3-76 203 203
- U41272-J-Z385-3-76 205 205
- U41272-J-Z385-3-76 207 207
- 8.4.1 Menu functions 208
- U41272-J-Z385-3-76 209 209
- U41272-J-Z385-3-76 211 211
- Figure 81: “BS2 Disks” subtab 211
- U41272-J-Z385-3-76 213 213
- Figure 83: “BS2 Tapes” subtab 214
- U41272-J-Z385-3-76 215 215
- U41272-J-Z385-3-76 217 217
- 8.4.2 X2000 tools main window 218
- 8.4.3 Online help 219
- 9 Global X2000 functions 221
- U41272-J-Z385-3-76 223 223
- Ê Click on the tab Tools 225
- U41272-J-Z385-3-76 227 227
- 9.2.2 Error situations 228
- U41272-J-Z385-3-76 229 229
- U41272-J-Z385-3-76 231 231
- U41272-J-Z385-3-76 233 233
- U41272-J-Z385-3-76 235 235
- U41272-J-Z385-3-76 237 237
- U41272-J-Z385-3-76 239 239
- U41272-J-Z385-3-76 241 241
- 9.5 Configuring printers 242
- U41272-J-Z385-3-76 243 243
- 244 U41272-J-Z385-3-76 244
- U41272-J-Z385-3-76 245 245
- 246 U41272-J-Z385-3-76 246
- U41272-J-Z385-3-76 247 247
- U41272-J-Z385-3-76 249 249
- 250 U41272-J-Z385-3-76 250
- <hardware-address> 251
- U41272-J-Z385-3-76 253 253
- U41272-J-Z385-3-76 255 255
- U41272-J-Z385-3-76 257 257
- U41272-J-Z385-3-76 259 259
- U41272-J-Z385-3-76 261 261
- U41272-J-Z385-3-76 263 263
- 9.6.1 ATNS 264
- U41272-J-Z385-3-76 265 265
- U41272-J-Z385-3-76 267 267
- U41272-J-Z385-3-76 269 269
- U41272-J-Z385-3-76 271 271
- U41272-J-Z385-3-76 273 273
- 9.7 Offline PSR 274
- U41272-J-Z385-3-76 275 275
- /tmp/psr 276
- /mnt/psr 276
- U41272-J-Z385-3-76 277 277
- Figure 105: Slice selection 278
- U41272-J-Z385-3-76 279 279
- Figure 107: Backup run of PSR 279
- U41272-J-Z385-3-76 281 281
- 9.7.3 Supported hardware 283
- 284 U41272-J-Z385-3-76 284
- 10 Dynamic Reconfiguration 285
- U41272-J-Z385-3-76 287 287
- U41272-J-Z385-3-76 289 289
- U41272-J-Z385-3-76 291 291
- 10.1.4 Requirements for DR 293
- U41272-J-Z385-3-76 295 295
- 0123456 789 297
- U41272-J-Z385-3-76 299 299
- U41272-J-Z385-3-76 301 301
- 10.2 Performing DR 303
- U41272-J-Z385-3-76 305 305
- U41272-J-Z385-3-76 307 307
- 10.2.2 The command interface 308
- U41272-J-Z385-3-76 309 309
- 310 U41272-J-Z385-3-76 310
- Example 310
- U41272-J-Z385-3-76 311 311
- U41272-J-Z385-3-76 313 313
- /opt/FJSVhwr/sbin/drc -abort 315
- 10.2.4 DR runs in BS2000 316
- U41272-J-Z385-3-76 317 317
- U41272-J-Z385-3-76 319 319
- U41272-J-Z385-3-76 321 321
- U41272-J-Z385-3-76 323 323
- 324 U41272-J-Z385-3-76 324
- 11.1 X2000 partition 325
- 11.1.2 Locale parameters 327
- 11.1.3 Recurrent tasks 329
- 11.2 Solaris partition 331
- U41272-J-Z385-3-76 333 333
- 334 U41272-J-Z385-3-76 334
- 12 What if 335
- 12.2 sx.diag command 336
- U41272-J-Z385-3-76 337 337
- 12.4 Create an IOH/IOS dump 338
- 13 X2000 messages 339
- U41272-J-Z385-3-76 341 341
- KVP0801 FILE-LOGGING FAILED 343
- 13.2 SVP emulation messages 344
- U41272-J-Z385-3-76 345 345
- U41272-J-Z385-3-76 347 347
- 13.3 IOD messages 348
- U41272-J-Z385-3-76 349 349
- U41272-J-Z385-3-76 351 351
- U41272-J-Z385-3-76 353 353
- IODE021, IODE022) 355
- U41272-J-Z385-3-76 357 357
- 13.4 HAL messages 358
- U41272-J-Z385-3-76 359 359
- U41272-J-Z385-3-76 361 361
- 13.5.2 Metasyntax 363
- 13.5.3 HWA error messages 363
- 13.5.4 HWI messages 364
- U41272-J-Z385-3-76 365 365
- 13.5.5 MAIN messages 367
- U41272-J-Z385-3-76 369 369
- U41272-J-Z385-3-76 371 371
- U41272-J-Z385-3-76 373 373
- U41272-J-Z385-3-76 375 375
- U41272-J-Z385-3-76 377 377
- U41272-J-Z385-3-76 379 379
- U41272-J-Z385-3-76 381 381
- 13.7 EVENT error messages 382
- U41272-J-Z385-3-76 383 383
- 384 U41272-J-Z385-3-76 384
- 14 Appendix 385
- SCSI controller 387
- Boot disk 387
- Crossbar 387
- U41272-J-Z385-3-76 389 389
- SCI Adapter 391
- FC Controller 391
- 14.2 Model ranges 393
- 14.2.2 SX130 394
- U41272-J-Z385-3-76 395 395
- on special release only 395
- U41272-J-Z385-3-76 397 397
- 14.2.3 SX140 398
- U41272-J-Z385-3-76 399 399
- System board 1 400
- System board 0 400
- U41272-J-Z385-3-76 401 401
- 14.2.4 SX150 402
- U41272-J-Z385-3-76 403 403
- U41272-J-Z385-3-76 405 405
- System board 01 406
- System board 00 406
- U41272-J-Z385-3-76 407 407
- U41272-J-Z385-3-76 409 409
- 14.3.3 Use as NTP time server 410
- Abbreviations 411
- U41272-J-Z385-3-76 413 413
- 414 U41272-J-Z385-3-76 414
- U41272-J-Z385-3-76 415 415
- U41272-J-Z385-3-76 417 417
- U41272-J-Z385-3-76 419 419
- U41272-J-Z385-3-76 421 421
- 422 U41272-J-Z385-3-76 422
- Related publications 423
- U41272-J-Z385-3-76 425 425
- U41272-J-Z385-3-76 427 427
- U41272-J-Z385-3-76 429 429
- U41272-J-Z385-3-76 431 431
- -> „UNIX based servers“ 432
- U41272-J-Z385-3-76 433 433
- 434 U41272-J-Z385-3-76 434
- Environmental protection 435
- 436 U41272-J-Z385-3-76 436
- U41272-J-Z385-3-76 437 437
- U41272-J-Z385-3-76 439 439
- U41272-J-Z385-3-76 441 441
- Contents 443
- U41272-J-Z385-3-76 445
- U41272-J-Z385-3-76 450
- SX Series Business Servers 451
- Comments 452
- Suggestions 452
- Corrections 452
- Information on this document 453
Related products and manuals for Dishwashers Siemens SX Series
Dishwashers Siemens SX Series Specifications
(42 pages)
(42 pages)
Dishwashers Siemens SR series Specifications
(23 pages)
(23 pages)
Dishwashers Siemens SL34A User Manual
(5 pages)
(5 pages)
Dishwashers Siemens SX Series User Manual
(16 pages)
(16 pages)
Dishwashers Siemens SE20T593EU User Manual
(51 pages)
(51 pages)
Dishwashers Siemens SC76M530EU User Manual
(30 pages)
(30 pages)
Dishwashers Siemens SF25T252EU User Manual
(40 pages)
(40 pages)
Dishwashers Siemens SF64A661EU User Manual
(29 pages)
(29 pages)
(28 pages)
Dishwashers Siemens SE 25T052EU User Manual
(41 pages)
(41 pages)
Dishwashers Siemens SE 50T591EU User Manual
(49 pages)
(49 pages)
Dishwashers Siemens SE 25M277EU User Manual
(41 pages)
(41 pages)
Dishwashers Siemens SE 60T392EU User Manual
(49 pages)
(49 pages)
Dishwashers Siemens HE2415C User Manual
(110 pages)
(110 pages)
Dishwashers Siemens SL34A User Manual
(66 pages)
(66 pages)
© 2020, manymanuals.com. All rights reserved. | 0.329 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals