Siemens SX Series User's Guide Page 271

  • Download
  • Add to my manuals
  • Print
  • Page
    / 453
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 270
U41272-J-Z385-3-76 271
Global X2000 functions Local and remote communications
9.6.2.3 ZASLAN
You cannot configure any BS2000 ZASLAN device on the onboard LAN controllers
hme 0, hme 1, etc.
If you use TCP/IP or ISO-LAN connections via an Ethernet cable between the local BS2000
and other systems then you should set ZASLAN. This is the only way that BS2000 can
obtain a direct view of the physical network.
You must also configure the ZASLAN device in the local BS2000 system.
Example for IP
/CREATE-NODE NODE-NAME=...
/CREATE-LINE LINE-NAME=...,IP-ADDRESS=nnn.nnn.nnn.nnn, -
/ L2-PROTOCOL=*CSMACD(NODE-NAME=...,WRITE-DEV=mn,READ-DEV=mn ,...
/BCIN ...,INI=ALL,ACT=ALL
/CREATE-PROCESSOR PROCESSOR-NAME=...
/CREATE-ROUTE ROUTE-NAME=... ,PROC-NAME=..., -
/ PATH=*NODE(NODE-NAME=...,LINE-NAME=..., -
/ L3-PROTOCOL=*IP(IP-ADDRESS=nnn.nnn.nnn.nnn))
/BCACT ROUTE=...
In order to use frame sizes above the Ethernet standard size, you must possess a Gigabit
Ethernet board (Solaris name = fjgi
1
). In this case, you must perform the following configu-
ration steps:
X2000
Example for the configuration of the fjgi driver:
You must add the entry set fjgi:fjgi_jumbo=1 in the file /etc/system.
You must also create a file /etc/fjmtu.fjgiX in which you should enter an MTU size of
between 1500 and 9000. X is the board number of the required fjgi port.
You must then perform a reboot (init 6).
In Jumbo mode it is not possible to send or receive any IEEE802.3 packages.
In the case of FTP connections, you should choose an MTU size smaller than
8232 bytes.
All the configuration possibilities for the fjgi driver are contained in the
“FUJITSU PCI GigabitEthernet User's Guide”. This Guide is present as an online
manual in the FJSVged driver package on the Control CD.
1.
The predecessor was fjge with the corresponding fjge driver and analog configuration
i
i
Page view 270
1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 452 453

Comments to this Manuals

No comments