Siemens SX Series User's Guide download pdf (Page 308)

100

101

308 U41272-J-Z385-3-76

Performing DR Dynamic Reconfiguration

10.2.2 The command interface

The commands described below can only be executed under the root ID and in the

partition(s) concerned.

Information functions – Partitions, system boards and associated resources

1. /opt/FJSVhwr/sbin/drcstat -board [all] -xpar

The

drcstat command lists the system boards of the machine and their configuration

statuses in the partitions (current partition, next partition after a Partition Solaris reboot). If

all is not specified, only those system boards are listed which are currently assigned to the

home partition.

# drcstat -board all -xpar

SB BN Status (Detail) PID Next_PID Board_Type CPU(MHz)

---- -- ----------------- --- -------- ---------- --------

00-0 0 Configured 00 00 0x34 1890

00-1 4 Configured 00 00 0x34 1890

00-2 8 Configured 01 01 0x34 1890

00-3 12 Configured 02 02 0x34 1890

01-0 1 Configured 03 03 0x34 1890

01-1 5 Disconnected -- -- 0x34 1890

01-2 9 --- -- -- --- ---

01-3 13 --- -- -- --- ---

In this example the first 5 XSBs are operating, the first 2 are being used by the partition (with

PID) 0 (here named 00), and the next 3 by the partitions 1, 2 and 3 (here named 01, 02,

03). The XSBs are permanently assigned to the partitions, i.e. also after any Solaris reboot

Next_PID = PID applies in a ll cases.

For XSB 01-1, which is not operating, no value is assigned to the

Next_PID setting, i.e. the

XSB is in the pool of free XSBs and could be attached to any of the partitions.

XSBs 01-2 and 01-3 do not exist on this server.

1 2 ... 303 304 305 306 307 308 309 310 311 312 313 ... 452 453

Comments to this Manuals

No comments

Siemens SX Series User's Guide Page 308

Comments to this Manuals

Related products and manuals for Dishwashers Siemens SX Series