Siemens SX Series User's Guide download pdf (Page 343)

U41272-J-Z385-3-76 343

X2000 messages KVP messages

KVP0801 FILE-LOGGING FAILED

Response

The access rights to the file structure /var/opt/SMAW/X2000/log and the file

/var/opt/SMAW/X2000/log/log_info should be checked and, if necessary, corrected.

This message is also output if archiving is set to FORCED and none of the existing logging

files could be archived. The system administrator must make sure that the archiving

command can be terminated without errors or the files must be deleted.

KVP0802 (&00) ARCHIVING FAILED

&00 = Archive file name

Meaning

The archiving command terminated with an error. If Archiving required is set then the

oldest logging file is deleted when the configured number of logging files is reached. If

Archiving requested is set then the attempt to archive the file is repeated at periodic

intervals.

Response

Check the archiving command for errors. If you are archiving to tape you may need to insert

a new tape and perform a manual backup.

KVP5000 KVP MESSAGE FILE COULD NOT BE OPENED

Meaning

The message file kvp.cat under /opt/SMAW/X2000/lib/nls/de or

/opt/SMAW/X2000/lib/nls/en no longer exists or the access rights are set incorrectly.

KVP continues to run but uses English message texts.

Response

You should check the file access rights and correct them if necessary. The file can be read

in again from the backup volume or the installation volume. You must then restart KVP.

KVP5001 INVALID KVP PARAMETER (&00)

&00 = Parameter

Meaning

KVP was called with invalid parameters. KVP terminates.

Response

Call KVP with a valid system designation.

The system designation must consist of three alphanumeric characters:

– The channel parameter must be a number between 0 and 127.

– The unit parameter must be a number between 0 and 254.

– The line parameter consists of the letter B (bus).

The trace parameter must be a number between 1 and 255.

1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 452 453

No comments

Siemens SX Series User's Guide Page 343