Siemens SX Series User's Guide download pdf (Page 237)

100

101

U41272-J-Z385-3-76 237

Global X2000 functions Magnetic tape cartridge devices

9.4.3 Adding a BS2000 system after initial configuration

The MTC device may not be used between the physical connection of the new

system and completion of configuration.

If you subsequently want to connect an additional BS2000 system in the SAN to the MTC

device then you must repeat the two steps described on page 234 in PRIMEPOWER

ServerView for the new system.

1. Configure the MTC device as a BS2000 device for the new system using the existing

mnemonic name.

2. Next, continue the configuration with one of the old systems so that you can add the

new system to the list shown in the Switched nodes box.

9.4.4 Removing a BS2000 system after initial configuration

The MTC device may not be used during configuration and until the system involved

has been detached.

If the host bus adapter to which the MTC is connected is removed from the partition

of the BS2000 system using Dynamic Reconfiguration, PCI HotPlug or a reboot, the

BS2000 system can remain in the Switched nodes list (see the HBA removed state

on page 241).

If you want to detach a BS2000 system in the SAN from the MTC device, go to the

PRIMEPOWER ServerView for the system concerned, delete the device and remove the

system from the list in the Switched nodes box. The procedure at this point depends on

whether the X2000 of the BS2000 system is still running and communicating with the other

BS2000 systems or not.

● Case A: X2000 running and communicating

In PRIMEPOWER ServerView, the MTC device for the BS2000 device concerned is

deleted. This removes the BS2000 system from the list in the Switched nodes box. The

removed system must be detached from the MTC device. The MTC device may not be

accessed by this system.

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 452 453

Comments to this Manuals

No comments

Siemens SX Series User's Guide Page 237

Comments to this Manuals

Related products and manuals for Dishwashers Siemens SX Series