Siemens Profiset 3030 User Manual download pdf (Page 39)

Functions used for making calls

Step by step

ACS

With ACS (Alternative carrier selection) the system can

be set to use a specific carrier regardless of user’s se-

lection. This feature is very useful for selecting the car-

rier that offers the best rates at the time of call or for

setting the system to use one operator only. This is

done by properly defining the rules.

The first digits of the number dialed by the user are an-

alyzed by the system. If they match the conversion rule,

they will be replaced by the default number as set forth

by that rule. You can also preset the route/destination to

be used. There is no field available to specify a carrier.

The carrier code must be included in the conversion

rule.

Different conversion rules can be applied to the same

number, depending on the time of day and day of the

week. It is possible to define a maximum of 100 conver-

sion rules.

Example: Number dialed: 262 XXXX

Conversion Rules:

The number that will be selected by the system is

341XXXX using destination 801. If this route/destination

is busy, the overflow option will be route/destination

803. You may insert pauses in the Conversion rules

(Consult the HiPath 1100 Manager help file).

Required: This feature must be configured for the sys-

tem by using the HiPath 1100 Manager.

t or Lift the handset or press the SPEAKER key.

p Enter the code to access an external line (e.g., 0).

w Wait for an external line dial tone.

p Enter the external number you want to call.

[1] ACS does not affect emergency numbers when the user dials di-

rectly.

Index Number

Selected

Alterna-

tive

number

Alterna-

tive des-

tination

Overflow

destina-

tion

01 267 342 0 801

02 262 341 801 803

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 136 137

Comments to this Manuals

No comments

Siemens Profiset 3030 User Manual Page 39

Comments to this Manuals

Related products and manuals for Telephones Siemens Profiset 3030