Siemens Multi Address Appearance (MAA) On OpenStage User's Guide download pdf (Page 88)

Step by step

Making Calls via Multiple Lines

Primary line

All multi-line telephones have a primary line. This line

can be reached in the usual manner via your public

phone number. Incoming calls are signaled on this line.

Secondary line

The secondary line on your phone is used as a primary

line by another subscriber in the system. Your primary

line, which is configured on another telephone in the

system, simultaneously functions as the secondary line

on that telephone.

Line utilization

Private line

A line that is used by a single telephone. This line can-

not be used as a secondary line by another telephone.

Shared line

A line that is configured on multiple telephones. The

line status (if configured) is displayed for all telephones

that share this line. If, for example, a shared line is being

used by a telephone, a status message indicating that

this line is busy is displayed on all other telephones.

Direct call line

A line with a direct connection to another telephone.

You can see the status of the line from the LED.

To avoid conflict between the individual multi-line

phones, you can configure the functions "Do not

disturb" and "Call forwarding" exclusively for the

primary line.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 119 120

No comments

Siemens Multi Address Appearance (MAA) On OpenStage User's Guide Page 88