Integration into an Automation System
8.2 PROFINET
SIMATIC IPC427C
52 Operating Instructions, 10/2010, A5E02414743-03
SIMATIC NET PC software
You can create, operate and configure SIMATIC installations using this software package.
For additional information, refer to the SIMATIC NET Manual Collection CD. The software
package and documentation are not included in the scope of delivery.
CAN
CAN interface (optional) for connection to CAN field bus systems.
RS232
The serial port can be used for data communication (via terminal applications, for example).
Additional information
Additional information is available in the catalog and the online ordering system Industrial
Automation and Drive Technologies (http://mall.automation.siemens.com
).
8.2 PROFINET
CP 1616 onboard
The basic characteristics of the PCS 1616 onboard are:
● Optimized for PROFINET IO
● With Ethernet realtime ASIC ERTEC 400
● Three RJ45 sockets for connecting terminal devices or addition network components
● Integrated 3-port real-time switch
● Automatic hardware detection
CAUTION
A maximum of one CP 1616/1604 module can be installed in one PG/PC. If you want to
use an additional CP 1616/1604 module, the CP 1616 onboard option must be disabled
via the entry "Onboard Profinet" in the BIOS Setup under Advanced > Peripheral
Configuration.
Comments to this Manuals