Connecting
6.4 USB strain-relief
SIMATIC IPC427C
40 Operating Instructions, 10/2010, A5E02414743-03
6.4 USB strain-relief
The USB strain-relief provided as an accessory is used to prevent accidental loosening of
the USB cable from the device. A cable binder (not included in the package) is needed to
use this accessory.
To fix the USB strain relief, you will need a TORX T20 screwdriver.
Attaching the USB strain relief
1.
Fasten the USB strain-relief
① to the
device housing with an oval-head
screw (M4 thread).
2.
Thread the cable tie ② through the
comb of the USB strain-relief to
clamp the USB cable.
Comments to this Manuals