Siemens v1.0 Service Manual download pdf (Page 82)

Simple example

2.6 Create HMI screen

STEP 7 Basic V10.5

82 Getting Started, 12/2009, A5E02651459-01

Result

You have created the graphic object "Bottle" with a movement animation. When the HMI

screen is loaded to the HMI device, the value of the tag "Position_Bottle" increases by one

after each basic cycle (200 ms). As soon the value reaches 100, the value of the tag is set to

"0". The position of the bottle is dependent on the value of the tag. If, for example, the tag

has the value 50, the bottle is in the middle of the conveyor.

In the next section you will modify the visibility of the bottle by means of the tag

"ON_OFF_Switch" of the "Machine ON/OFF" button.

2.6.4.5 Modify visibility of motion animation

Introduction

The movement animation of the bottle is automatically started when the HMI screen is

loaded. The follow steps show you how to configure the visibility of the animated bottle in the

screen depending on the value of the PLC tag "ON_OFF_Switch".

Requirements

The HMI screen is open.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 201 202

No comments

Siemens v1.0 Service Manual Page 82