Example "Motion"
5.7 Simulate HMI screen
STEP 7 Basic V10.5
Getting Started, 12/2009, A5E02651459-01
189
5.7 Simulate HMI screen
Introduction
The following steps show you how to test the created HMI screen with the Runtime
Simulator. Use the Runtime Simulator to simulate the activation of the PLC input for the light
barrier "LS3".
Procedure
To start the simulation of the created HMI screen, follow these steps:
1. Open the HMI screen.
2. Start the runtime simulation via the menu bar.
The simulation of the runtime is started. After the start of the simulation the HMI screen is
displayed in the "RT Simulator" window and the red LED flashes (machine switched off).
3. Start the machine.
The green LED flashes. Nothing changes with regard to the visibility of the first bottle, as
this animation now depends on the bit value of the "MC_MoveRelative_DB_Busy"
parameter that was automatically stored as HMI tag.
Comments to this Manuals