Example "Motion"
5.6 Expand HMI screen
STEP 7 Basic V10.5
180 Getting Started, 12/2009, A5E02651459-01
5.6 Expand HMI screen
5.6.1 Change graphic object conveyor
Introduction
The following steps show you how to replace the existing graphic object "Conveyor" with the
graphic "ConveyorMotion.wmf" in the HMI screen. The graphic contains two conveyors
instead of one; these are connected to each other.
Requirements
The ZIP file "WinCC Graphics" has been extracted and stored in a local directory. For the
directory, a link has been created in the "Toolbox" task card of the "Graphics" pane. See
Graphic object "Conveyor" (Page 74) section.
Procedure
To expand the HMI screen, follow these steps:
1. Open the HMI screen.
2. Open the link to the local folder "WinCC Graphics" in the "Graphics" pane of the
"Toolbox" task card.
3. Disable the "Large icons" option.
Comments to this Manuals