Extended example
3.3 Test expanded program with program status
STEP 7 Basic V10.5
122 Getting Started, 12/2009, A5E02651459-01
In Network 2:
The conveyor is set into motion once again.
7. In Network 2, modify the "LS_2" tag to "0".
The LS_2 tag is reset to the signal state "0". This state simulates that the bottle has left
the heating chamber.
8. In Network 2, modify the "LS_3" tag to "1".
The "LS_3" tag is set to the signal state "1". This state simulates that the bottle has been
transported to the end of the conveyor and is detected by the light barrier "LS3"
The conveyor_drive_ON_OFF tag is reset to the signal state "0" and the conveyor will
stop.
9. Terminate the online connection.
Comments to this Manuals